Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

25-308 load

Discussion in 'Handloading and Reloading' started by OK-gobbler, Nov 14, 2006.

Thread Status:
Not open for further replies.
  1. OK-gobbler

    OK-gobbler Member

    Joined:
    Aug 24, 2006
    Messages:
    76
    Location:
    Oklahoma
    Anybody have any load info for a 25-308 aka 25 souper. I've got the gun and dies and some bullets. 100 gr and 117 gr. Probably will try some 85 gr. I have IMR4895, IMR4831, and H414 available.

    This is a good round. Kind of sad that it never made it into production. A 308 brass necked down to a .257. It sort of got left out of the mix. 243, 260, 7mm-08, 308, but no .257.

    Any help would be apreciated.:)
     
  2. georgeduz

    georgeduz Member

    Joined:
    Dec 6, 2005
    Messages:
    287
    Location:
    peoples republic of nj
  3. joe diaz

    joe diaz Member

    Joined:
    Nov 3, 2007
    Messages:
    2
    Location:
    rio rancho n.m.
    j diaz

    :):Di to just picked up a 25-308 had lots of help w/load data if you can send me your e-mail i can send you some of the loads that i used in my sako L579,it loves 75 gr V-Max and Varget 41 grs. CCI primers,it was hard getting data lots of people help out i will send what i have hope all works out and if you ever get rid of yours let me know first i would try to get it from you you are going to like shooting it,its like a 243 on steriods
     
  4. fineredmist

    fineredmist Member

    Joined:
    May 3, 2006
    Messages:
    512
    Location:
    Wethersfield, Ct.
    For what it's worth my .25-06 just loves Speer 87 gr TNT bullets. They are accurate and extremely effective on varmints.
     
  5. joe diaz

    joe diaz Member

    Joined:
    Nov 3, 2007
    Messages:
    2
    Location:
    rio rancho n.m.
    25-308

    i have a bunch of 25-06 stuff dies bullets havy ones if you need any?
     
  6. $10ring$

    $10ring$ Member

    Joined:
    Dec 8, 2008
    Messages:
    2
    Location:
    Troy, Montana
    25- souper

    I recently purchased one myself, anyone have any load data worked up for one?
     
  7. $10ring$

    $10ring$ Member

    Joined:
    Dec 8, 2008
    Messages:
    2
    Location:
    Troy, Montana
    25- souper, 25-308

    I purchased a rcbs trim die for 25 souper, found out it has a 17degree shoulder instead of a 20. The ammo I got with the gun is 20 degree also. Anyone have any ideas? If the wildcat is based on the 308 why would the trim die be a 17 degree?
    SO MANY QUESTIONS SO LITTLE TIME!!

    any body know where there is a set of affordable dies laying around?
     
Thread Status:
Not open for further replies.

Share This Page