Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

300 ultra project

Discussion in 'Rifle Country' started by dougestyle, Jan 3, 2007.

Thread Status:
Not open for further replies.
  1. dougestyle

    dougestyle Member

    Joined:
    Sep 27, 2006
    Messages:
    83
    Location:
    Robbins, N.C.
    I just got my Remington 700 SPS the other day and was wondering what are the first couple of things I should do to it to trick it out a little for some long range shooting. I will get another barrel after I wear out the factory one, so that's not an issue right now. I thought about a trigger job and a muzzle brake. Do you guys agree? If so, what brands should I look at? Any suggestions will be appreciated.
     
  2. TIMC

    TIMC Member

    Joined:
    Feb 16, 2003
    Messages:
    2,786
    Location:
    Texas
  3. dakotasin

    dakotasin Member

    Joined:
    Dec 26, 2002
    Messages:
    4,777
    Location:
    Transient
    adjust the factory trigger, bed the rifle, and go shoot. i wouldn't brake it, but that's just me.
     
  4. TIMC

    TIMC Member

    Joined:
    Feb 16, 2003
    Messages:
    2,786
    Location:
    Texas
  5. SUBMOAS

    SUBMOAS Member

    Joined:
    Nov 16, 2006
    Messages:
    187
    Location:
    San Antonio
    Gunsmith...

    Have a "Good" gunsmith smooth out the trigger engagement. Free float the barrel and bed the action.
    Make sure you break in the barrel!!
    IMO,
    SUBMOAS
     
  6. win71

    win71 Member

    Joined:
    Feb 8, 2005
    Messages:
    678
    Shoot it first

    I think I would shoot it off the bench a while. It may not need much "tweaking" I bought one when they first came out. It is for hunting. It's a wood stock with iron sights. I have QD rings and a Zeiss 3.5-10 scope. At the time I bought it brass was unavailable. I bought several boxes of Rem. loaded with 180 gr. noslers. Once I got used to the recoil and got it sighted in it shot 3-shot groups at 100 yards that were almost without exception 1 inch or less. My hunting partner bought one at the same time only with comp. stock, stainless steel and had a brake put on. His shot the same. He decided not to reload. I do, but I'm not beating those factory groups by much.

    If you don't abuse the rifle, i.e. heat the barrel way up, it's going to take a while to wear it out. Without a break I think you will find this rifle will become less than comfortable to shoot off a bench real fast. I don't like brakes, however I have shot my partners and it's not much worse than a 30-06.

    With the exception of trigger work on Remington’s I don't usually mess with factory rifles used for hunting. I did spot for a couple guys the other day that were shooting for groups at 600 yards. One had a 300 RUM the other a 30-378. Both Remington’s and both with fluted 30 and 32 inch SS barrels put together by some Smith in Oregon. I'm not sure what the advantage was to the longer barrels. Someone else on this forum will have to chime in on that.
     
Thread Status:
Not open for further replies.

Share This Page