Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

.327 Fed Mag Dies

Discussion in 'Handloading and Reloading' started by AgentAdam, Nov 28, 2008.

Thread Status:
Not open for further replies.
  1. AgentAdam

    AgentAdam Member

    Joined:
    Jul 2, 2008
    Messages:
    439
    Does Lee or RCBS make a .327 Federal Magnum die set, preferably carbide? Do they include spacers for .32H&R,.32 S&W Long,and .32 S&W Short?
     
  2. Wil Terry

    Wil Terry Member

    Joined:
    Dec 26, 2002
    Messages:
    1,129
    Location:
    Black Hills, South Dakota, USA
    You have it bass ackwards....

    They would have to make the dies in 32S&W and furnish spacers to raise the dies higher in the die stations for the longer cartridges.
    My 32S&W LONG dies do all of 'em just fine. I made my own spacers as that is simple too.
     
  3. moosehunt

    moosehunt Member

    Joined:
    Jan 10, 2008
    Messages:
    893
    You just get dies for .32 S&W/.32 H&R and adjust them, either specifically with the rings or non-specifically by using spacers for .327 Federal. There aren't and won't be specific .327 dies.
     
Thread Status:
Not open for further replies.

Share This Page