Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

.351 ammo

Discussion in 'Rifle Country' started by ADKWOODSMAN, Apr 23, 2007.

Thread Status:
Not open for further replies.
  1. ADKWOODSMAN

    ADKWOODSMAN Member

    Joined:
    Sep 19, 2006
    Messages:
    1,066
    Location:
    Adirondacks of NYS
    Does anyone have a source for .351 ammo.
     
  2. JesseL

    JesseL Member

    Joined:
    Aug 26, 2004
    Messages:
    2,492
    Location:
    Prescott, AZ
  3. 351 WINCHESTER

    351 WINCHESTER Member

    Joined:
    Mar 19, 2007
    Messages:
    4,055
    You're in luck dude. You got a 07 winchester an no ammo. If you reload you are a lucky dude indeed. I get my brass from Midway or Buffalo bullet (brass and bullets). Since this rifle is straight blowback you can load her hot, medium or light. Good powders are 2400 and 4227. For jacketed bullets try 17.5 grs. of 2400. That's lighter than factory, but heavy enough (you don't want to beat the gun to death. I've gone down to 10 gr. of 2400 and she still functions like there is no tomorrow. If you use lead bullets keep it on the light side to avoid leading.

    If you don't reload, plan on spending about $1. per round. There are several sources of ammo on the internet. When shooting try to have someone keep an eye open for your brass as these rifles really kicks the brass out, even at reduced loads. Don't expect to get much accuracy as this rifle ( I have 3) she wasn't made to shoot tight groups. She was made to be 100% relaible and that she is.
     
  4. 351 WINCHESTER

    351 WINCHESTER Member

    Joined:
    Mar 19, 2007
    Messages:
    4,055
    After checking the prices for loaded ammo, you need to reload. If you don't know how find someone that will teach you. You will not regret it. Some old info shows a max. charge of 19gr. of 2400, but DON'T use that much powder. The burn rate for 2400 was increased some time ago and that info is old. The factory load is right at 45,000 psi.

    About the only thing that goes wrong with these rifles is the stock and forearm crack, especially with factory loads or their equivelant.
     
  5. ADKWOODSMAN

    ADKWOODSMAN Member

    Joined:
    Sep 19, 2006
    Messages:
    1,066
    Location:
    Adirondacks of NYS
    Thanks everyone

    Thanks for all the info-now the fun begins, something new to reload for.
     
  6. 351 WINCHESTER

    351 WINCHESTER Member

    Joined:
    Mar 19, 2007
    Messages:
    4,055
    Don't try for near max. loads as if your stock and forearm aren't cracked allready, they will be. Good luck.
     
Thread Status:
Not open for further replies.

Share This Page