.357 bullets recommendations

[Nasty Canasta]

For plinking I like medium to light loads using 148gr double ended wad cutters, Berrys or Xtreme. They’re accurate & like the cookie cutter holes shooting paper.

 

[GeoDudeFlorida]

I don't believe it's possible to compress enough imr4227 in the case to hurt a full frame 357.... if I remember I was trying 16 and still wasn't fully burning.... use a mag primer...

I found the same thing with IMR 4227 in a variety of chambers, including .44-40. You just can’t get enough in the case, topped with a 200gr soft cast, to get in trouble with a modern solid frame revolver. The older the steel, the thinner the cylinder walls, the less true the statement becomes.

 

[irving]

When you fill the case with IMR-4227, the accuracy is great, too. No "powder forward" or "powder back" variations.

 

[WestKentucky]

Sad truth, I have never bought a single bullet in 9mm or 38 caliber. I have gotten so many in bench buys and part-outs I have never needed to buy any. If I were to buy bullets though, especially just for plinking and nothing really precise, I would be looking for Zero bullets. I had some a while back that I liked and noticed that they were super cheap when I was actually looking for 32 cal pistol bullets. I also like magtech bullets when the price is right. No reason to pay for a fancy brand name when a similar product is available on the cheap.

 

[Riomouse911]

If coated bullets are on your radar, give Eggleston Bullets a try. I have been shooting their .358 SWC and 148 RNL for years.



Accurate, easy to load, not too expensive and very fast shipping.

The non-metallic colors seem to be coated a bit thicker than the metallic ones, but I have never had any leading issues so it may be just my opinion.

Store - Buy EM Bullets Direct from the Manufacturer

Buy Eggleston Munitions coated bullets directly from our online store.

www.egglestonmunitions.com

Stay safe.

 

[Dane R. Marley]

If coated bullets are on your radar, give Eggleston Bullets a try. I have been shooting their .358 SWC and 148 RNL for years.

View attachment 1254268

Accurate, easy to load, not too expensive and very fast shipping.

The non-metallic colors seem to be coated a bit thicker than the metallic ones, but I have never had any leading issues so it may be just my opinion.

Store - Buy EM Bullets Direct from the Manufacturer

Buy Eggleston Munitions coated bullets directly from our online store.

www.egglestonmunitions.com

Stay safe.

They look Great.

 

[Austin Albright]

Who likes IMR- 4227 under plated bullets. I am setting up my 750 today for 357 and I have a box of plated 158 gr bullets that I have been using in my 38 spl loads. I want to try some in my 357s.

I just picked up a second set of RCBS 357 dies from a gentleman in the Long-Range Forum. My plans are to have one 750 tool head set up for 38 spl and one set up for 357. The dies look brand new, and he also included a box of XTP bullets with a 357 manual for $65.00 shipped.

Definitely didn't get hurt on that deal. You will like the Hornady XTP bullets.
I have a Dillon 750 and would do the same. Have a tool head for 38 special and one for 357. Seems like it takes me forever to get the dies adjusted to my liking for a certain caliber. I then don't want to start over again.
You have the added expense of a new tool head and a set of dies but smile brightly when it comes to loading the next caliber.
I guess my patience is getting shorter and shorter for some things.

 

[RealGun]

Rim Rock makes a nice 158gr conical flat point cast that I have been using since Penn closed down. Well priced and accurate.

I think this must be the one:

https://rimrockbullets.com/xcart/-38-357-tc-158-gr-per-800.htm

That is a good likeness to what I had been using from Penn. It uniquely lacks a leading band (ahead of the crimp groove), which was the solution to other bullets hanging up in my cowboy rifle action. The cone shape was best for tube feeding up to the chamber.

 

[JohnB-40]

That is a good likeness to what I had been using from Penn.

I'm on my second batch of 800 with these bullets. Very satisfied with product and customer service. I kind of panicked when Penn shut down,still have 250 in my stash,I treat them like gold