Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

.357 Dan Wesson Pistol Pack

Discussion in 'Handguns: Revolvers' started by Mookie55, Dec 4, 2007.

Thread Status:
Not open for further replies.
  1. Mookie55

    Mookie55 Member

    Joined:
    Dec 4, 2007
    Messages:
    2
    Hello, this is my first post on this site. I have a .357 Dan Wesson Pistol Pack with 2 1/2 inch bbl, 6 inch bbl, 10 inch vent bbl, with 3 grips and case that I have owned for over 20 years. A friend of mine is asking to buy it and I dont have a clue on the value.

    On this gun there is only a serial number and not a model number, making it impossible for me to search for a value. Its a good friend and I dont want to cheat him, and I dont want to cheat myself either. Its had less than 300 rounds shot through it.

    Any help would be appreciated.

    Thanks,
    Mookie55
     
  2. Ala Dan

    Ala Dan Member in memoriam

    Joined:
    Dec 24, 2002
    Messages:
    12,879
    Location:
    Home Of The First Capitol Of The Confederate State
    Last one of the DW .357 Pistol Packs (complete) I saw, sold for $750 at a gunshow
    in Birmingham, AL~! :eek: :uhoh: ;)
     
  3. Canuck-IL

    Canuck-IL Member

    Joined:
    Feb 15, 2005
    Messages:
    1,590
    A 4 barrel with the 2 original grips and the fitted suitcase went for $550 at a retail store here about 5 months ago ... lowest I've seen for that set for awhile. It was about 95% shape. If the condition is about the same and you have both grips and the case, I'd say 650 would be about right.
    /Bryan
     
  4. micky692002

    micky692002 member

    Joined:
    Nov 30, 2006
    Messages:
    102
    I have one with the 4 and 8 inch barrels and the pouch and bought it for $200.00 en near perfect condition.
     
  5. GUNKWAZY

    GUNKWAZY Member

    Joined:
    Nov 4, 2004
    Messages:
    976
    Location:
    AZ
  6. 00blkgt

    00blkgt Member

    Joined:
    Jul 15, 2005
    Messages:
    70
    I would recommend that you hold onto it. However if you really want to sell it I would want $800 to $900 for it if everything is in near new condition.
     
  7. Mookie55

    Mookie55 Member

    Joined:
    Dec 4, 2007
    Messages:
    2
    Thanks for all the responses.

    How would I go about getting the model of this gun, it doesn't have it posted anywhere on the gun, just the seriel number?

    Mookie
     
  8. Majic

    Majic Member

    Joined:
    May 3, 2003
    Messages:
    5,370
    Location:
    Virginia
    If it's blue then most likely it's a Model 15. If it's stainless then it's probably a Model 715.
     
  9. jameslovesjammie

    jameslovesjammie Member

    Joined:
    Sep 17, 2007
    Messages:
    243
    If it looks like the ones pictured in the links above, it is the model 15. It should be almost the exact size of a K frame Smith.
     
    Last edited: Dec 5, 2007
  10. Cougfan2

    Cougfan2 Member

    Joined:
    Aug 7, 2007
    Messages:
    1,731
    Location:
    Portland, OR
    I'm jealous. I traded my Dan Wesson model 15 years ago for a Win 94 30-30. Worst gun trade I ever made. It was the best shooting pistol I've ever owned. Unless you just really don't want it, I'd say hang onto it.
     
Thread Status:
Not open for further replies.

Share This Page