Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

357 Sig .335 TMJ FN

Discussion in 'Handloading and Reloading' started by littlebob3, Sep 21, 2012.

Thread Status:
Not open for further replies.
  1. littlebob3

    littlebob3 Member

    Joined:
    Nov 8, 2011
    Messages:
    122
    Location:
    illinois
    I have sold my Sig 226 357... I still have over 800 .335 TMJ FN Speer bullets.

    The question is, can I use them in reloading 9mm? I have been using 4.2 gn of Win 231 under 124 berry RN bullets and its working great.

    Thank you for any input on this.

    Littlebob3
     
  2. cfullgraf

    cfullgraf Member

    Joined:
    Oct 19, 2010
    Messages:
    7,138
    Location:
    East TN
    Do you mean .355" diameter?

    They should work with the appropriate load and seating depth for proper feeding. I have shot bullets designed for 9x19 in my 357 Sig.
     
  3. littlebob3

    littlebob3 Member

    Joined:
    Nov 8, 2011
    Messages:
    122
    Location:
    illinois
    Yes... .355" diameter made of the Sig 357 by Speer... and now would like to use then in 9mm loads.

    Littlebob3
     
  4. ReloaderFred

    ReloaderFred Member

    Joined:
    Apr 28, 2005
    Messages:
    5,825
    Location:
    Oregon Coast
    They will work just fine in your 9x19 loads. The reason they labeled them for 357 Sig was the flat nose, which the 357 Sig requires. I load both calibers, and use the same bullets for both.

    Hope this helps.

    Fred
     
  5. jjjitters

    jjjitters Member

    Joined:
    Sep 7, 2012
    Messages:
    216
    Yep, what fits in the Sig will work in the 9.
     
  6. Bovice

    Bovice Member

    Joined:
    Sep 27, 2009
    Messages:
    1,593
    In terms of OAL, look to what you might use if you were loading JHPs of that weight.
     
  7. littlebob3

    littlebob3 Member

    Joined:
    Nov 8, 2011
    Messages:
    122
    Location:
    illinois
    Many thanks to all for the infomation.

    Littlebob3
     
Thread Status:
Not open for further replies.

Share This Page