Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

44 Mag Mold Question

Discussion in 'Handloading and Reloading' started by Rugg_Ed, Feb 1, 2013.

Thread Status:
Not open for further replies.
  1. Rugg_Ed

    Rugg_Ed Member

    Joined:
    Sep 13, 2009
    Messages:
    93
    Location:
    North West USA
    Looking for others that have used this bullet C429-240-SWC Lee Mold in revolvers 4" to 7 1/2" BBLs. This Batch after Casting, Sorting, Gas Checked, Sized(.430) / Lubed with 50/50 gives me a 248 grn + / - .8 grn variation which is fine for my use.
    Interested in what size of groups you are getting verses Low and Higher velocities.
    Would like to compare to my results at 25 to 50 yards from the bench. Just not that impressed with what I am getting for groups compared to my other molds.
    Thanks for any info.
    Ed
     
  2. blarby

    blarby Member

    Joined:
    Feb 25, 2011
    Messages:
    5,144
    Location:
    Calapooia Oregon
    Ditchtiger uses these- he should be able to check in soon........
     
Thread Status:
Not open for further replies.

Share This Page