Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

7.62x39

Discussion in 'Handloading and Reloading' started by General Tso, Sep 10, 2011.

Thread Status:
Not open for further replies.
  1. General Tso

    General Tso member

    Joined:
    Oct 24, 2009
    Messages:
    386
    Location:
    Ohio
    I bought a new gun that shoots this cartridge and bought some ammo. The best price I can find on non-corrosive ammo is .25 per round. I reload for all my other guns. Why does no one/very few reload this cartridge? Brass cases are available as is brass cased ammo. I'm sure it can be reloaded for less than .25 per round.
     
  2. jcwit

    jcwit Member

    Joined:
    Oct 19, 2007
    Messages:
    8,011
    Location:
    Great state of Indiana
    I reload this cartridge. Have for years.
     
  3. nambu1

    nambu1 Member

    Joined:
    May 12, 2008
    Messages:
    337
    Location:
    West Virginia
    I load these with 23.5gr of AA1680 and either 125gr SP or FMJ. Shoot them in an AK and 2 SKS's.
     
  4. Ohio Gun Guy

    Ohio Gun Guy Member

    Joined:
    Apr 29, 2008
    Messages:
    2,466
    Location:
    Central Ohio
    Not sure what you bought.... If it is an AK it may chew up the brass making it costly to reload.

    If you've got a CZ bolt action or something commercial, go for it, IMO.
     
  5. Sky

    Sky Member

    Joined:
    Aug 4, 2010
    Messages:
    2,927
    Location:
    Texas
    Aimsurplus has wolf and Golden Bear cheaper than that. I shoot the Yugo in all my com blocks and even in an AR 7.62x39 upper. I just clean my guns with windex and then lube with Breakfree CLP. No problems so far.

    Yugoslavian 7.62x39 123grn FMJ 15rd box


    Ammunition Purchase Requirements


    1,260rd case (84 boxes): $214.20ea
    (Only 17 cents a Round!)

    Beautiful 1980-90's Surplus Yugoslavian 7.62x39 ammunition. This is the best shooting 7.62x39 ammunition available. Features a 123grn lead core copper jacketed bullet, brass case, and berdan corrosive primer. Packed 15rds in a box, and 1,260rds (84 boxes) sealed in metal tin inside of a hinged latched wooden case.
     
  6. Hondo 60
    • Contributing Member

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,325
    Location:
    Manitowoc, WI
    You just don't hear about reloads because you can get ammo very cheap.
    Wolf/Tula can be cheaper than reloads if you have to buy the bullets.(not always, but usually)

    If you cast your own, then it'll be cheaper to reload.
     
  7. Ken70

    Ken70 Member

    Joined:
    Aug 23, 2011
    Messages:
    350
    1100 rounds of Chi-Com in stripper clips, $89.95 in 1993. I still have about half of it, waiting for the world to end as we know it.....
     
  8. ArchAngelCD

    ArchAngelCD Member

    Joined:
    Nov 25, 2006
    Messages:
    22,131
    Location:
    Northeast PA, USA
    The only gun I have that shoots the 7.62X39mm round is a cheap AK rifle. I bought a bunch of Russian ammo in bulk when the price was still $99/case. (1,000 rounds) The rifle isn't accurate so I personally see no reason to load for it. If I had a good bolt action rifle chambered in that caliber I would probably load for it but for the AK I have I just blow off ammo for fun.

    BTW, ammo has come down a bit from the highs. Even though you will probably never see a $99 case again the prices have come down to $99/half case. That's 19 cents a round which is better than the 25 cents a round you are seeing. Right now Ammo-To-Go has 1260rds of Yugoslavian Military 123gr FMJ Ammo for $219.95 in stock. (17 cents a round) I'm sure there are other deals around the NET if you look hard enough.
     
  9. jcwit

    jcwit Member

    Joined:
    Oct 19, 2007
    Messages:
    8,011
    Location:
    Great state of Indiana
    You want accuracy? Reload your own. You do say you have a bolt action rifle, a CZ?
     
  10. General Tso

    General Tso member

    Joined:
    Oct 24, 2009
    Messages:
    386
    Location:
    Ohio
    That cheap Yugoslav stuff is corrosive. That's what I'm trying to avoid. Although it does come in brass cases. Would have to drill a flash hole. Too much hassle. How is 7.62x39 on brass? Can you get a lot of loadings per case?
     
  11. Oathkeeper1775

    Oathkeeper1775 Member

    Joined:
    Jun 3, 2011
    Messages:
    138
    Location:
    Oregon Coast Range
    Mini 30 point

    I reload what I have fairly economically but I often discern over the loading costs of new components;

    A box of 20, Boxer-primed X39 (Fiocci) costs about 10 bucks+s&h.

    New Winchester Brass ($20 for 50) in .308 dia, primers ($4 for 100), # 7 and bullets are only a couple dollars less than new bullets, OK with me.

    It seems good enough (for me) to buy the loaded Fiocci; either shoot em and reload em or just stack them up in cans for "the big one".

    Lately, I've been having some luck going behind the two-step commandos and picking up their brass best deal for me as cost basis goes way down.

    I do both, I like to load new stuff too.
     
  12. FROGO207

    FROGO207 Member

    Joined:
    Dec 7, 2008
    Messages:
    6,306
    Location:
    Mount Desert Island Maine
    I do and will reload for this one. However the cost to reload with all purchased components is much higher than buying the steel cased at the present time IMHO. For a serious, as accurate as the SKS will shoot round with a premium bullet I reload my own. I have 300 reloads in reserve, and about 6K steel cased in ammo cans.
     
  13. DANNY-L

    DANNY-L Member

    Joined:
    Sep 9, 2010
    Messages:
    107
    Location:
    Northern,ny
    I did up some loads I think were good for my mini30,mine was a .310dia. I didn't want to use the steel cases because of all the bad stories I've heard about it in the mini although lots of people use it without issue.
     

    Attached Files:

    Last edited: Sep 11, 2011
  14. steve4102

    steve4102 Member

    Joined:
    Oct 14, 2004
    Messages:
    2,452
    Location:
    Minnesota
    I load for the 7.62 x 39. I have a custom Mini-30 and an AR-15. Both will shoot sub MOA with quality bullets and handloads. Both will shoot 3-5 inch groups with cheap ammo.

    What rifle did you buy?
     
  15. jcwit

    jcwit Member

    Joined:
    Oct 19, 2007
    Messages:
    8,011
    Location:
    Great state of Indiana
    I would guess I get approx 10 loadings per case, but I shoot cast bullets and use mild powder charges which is easy on the case. I do not actually keep a reloading count on the cases just sirmising the number.

    I do keep track of loadings for my .223 bolt action and have now gone to over 90 reloads per case. Here again I'm using accurate loads which in my case happen to be mild. These are neck sized only.

    Hope this helps
     
  16. res45

    res45 Member

    Joined:
    Sep 23, 2007
    Messages:
    554
    Location:
    North Carolina
    Good shooting there DANNY-L nice group with the 150 gr. bullets. I've been reloading for my two SKS rifle now for about seven years as other have stated it's going to be hard to beat the cost of cheap Russian steel case ammo for general shooting purposes due to cost of components especially the bullet.

    If reloading isn't an option due to cost of getting set up you can do yourself a great favor and get several boxes of different brands of X39 ammo and find which one shoots the most accurately in your rifle adjust the sights accordingly and stick with it.

    I stocked up on lots of cheap components many years ago I can still load quality jacketed bullet ammo at the cheapest Russian ammo prices. I also started casting all my own bullets several years ago including the X39,my cast bullet load run me anywhere between 8 and 10 cents a rd. depending on the amount of powder I use.
     
  17. armoredman

    armoredman Member

    Joined:
    Nov 19, 2003
    Messages:
    16,438
    Location:
    proud to be in AZ
    I load and cast for that round, a fantastic NOE 129 grain mold.
    Those who use Accurate Arms powders like me, check your data, they changed all the loads due to new testing, and 24 grains is no longer the standard - it's below minimum for some reason. I still use AA#1680, but also H4895 and H335, gives great accuracy in both my CZ 527M and vz-58.
     
Thread Status:
Not open for further replies.

Share This Page