Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

9mm Ammo

Discussion in 'Handguns: Autoloaders' started by Mikenmag, Apr 7, 2007.

Thread Status:
Not open for further replies.
  1. Mikenmag

    Mikenmag Member

    Joined:
    Mar 24, 2007
    Messages:
    12
    Location:
    Chicago
    Can someone help me understand the difference between CCI Blazer ammo and CCI Blazer Brass? There seems to be a small price difference of one penny per load. I am new to pistol shooting. Is one better than the other?
    Thanks.
     
  2. ARTiger

    ARTiger Member

    Joined:
    Mar 6, 2006
    Messages:
    803
    Regular Blazer has aluminum cases which cannot be reloaded and also may have feeding problems in some guns. Blazer brass is like any other traditional brass cased ammo. If your gun cycles Blazer (aluminum) well, it's a cheaper way to get in a lot of shooting.
     
  3. Gary G23

    Gary G23 Member

    Joined:
    Jan 1, 2003
    Messages:
    1,451
    Location:
    Corvette City
    Some guns will have extraction problems with aluminum cases. I've had extraction problems with aluminum Blazer in CZ's and XD's. If you're shooting a Glock it won't matter.
     
  4. 1 old 0311

    1 old 0311 member

    Joined:
    Jun 26, 2005
    Messages:
    2,672
    Location:
    Planet Earth
    MOST indoor ranges forbid the use of the aluminum case ammo. They want to resell the brass cases.
     
  5. PPGMD

    PPGMD Member

    Joined:
    Mar 20, 2007
    Messages:
    879
    I am guessing that you are looking at CCI Blazer for cheap ammo? The cheapest ammo I have found is Winchester White Box ammo. I can get a 100 pack for $15 from Walmart.

    Cheapest ammo around.
     
  6. possum

    possum Member

    Joined:
    Oct 12, 2005
    Messages:
    8,942
    Location:
    Concord, N.C.
    regular balser primarially black box, has aluminum casings and can not be reloaded like was said, and the blaser brass, is brass cased and reloadable. don't be turned off by what they say about the feeding issues, that may be the case, but you can answer that question yourself by shooting some through your guns. i have put 550rds of it through my handguns within the last 2 weeks or so and i have had no problems. the aluminum stuff i mean, and i have been shooting the blazer brass for quite a while, in all calibers. to give you an example of accuracy with these loads, which isn't always great it is gun dependant but here is a 10yd group standing shooting blazer brass 230gr.

    rugertarget16rds.jpg

    btw that is 16rds 2 full mags. it works for me!
     
  7. Jenrick

    Jenrick Member

    Joined:
    Mar 17, 2005
    Messages:
    1,759
    Location:
    Austin, TX
    Well I've put 2380 rounds of blazer through my G34, 620 of which was brass the rest was the aluminum case. All of it has shot without any problems, grouped as well as I was shooting, and in general worked just fine.

    Shoot it through you're own weapon and see if it feeds and extracts without a problem. Then see if it shots accurately enough for your purposes. Then go with the cheapest that satisfys the above.

    -Jenrick
     
  8. Mikenmag

    Mikenmag Member

    Joined:
    Mar 24, 2007
    Messages:
    12
    Location:
    Chicago
    Thanks

    Thanks all....I did find wwb at a local walmart for 14.62 per box of 100 but Natchez shooting supplies on the net has blazer for 6.69 and blazer brass for $6.99 per box of 50. Which do ya think is the better deal?
     
  9. PPGMD

    PPGMD Member

    Joined:
    Mar 20, 2007
    Messages:
    879
    After shipping the price is going to likely be the same, but you can spread out the purchases if you buy WM WWB.

    Where as the deal gets worse with smaller amounts via mail order. Also no waiting for shipping with WM WWB.

    Also one final note they both aren't the cleanest ammo, but I found that WWB is a bit cleaner then CCI Blazer.
     
  10. gandog56

    gandog56 Member

    Joined:
    Apr 5, 2006
    Messages:
    782
    Location:
    Mobile, AL.
    Not where I live. They all sell Blazer aluminum. And I keep all my own brass for reloading, they aren't getting it.:scrutiny:
     
  11. PPGMD

    PPGMD Member

    Joined:
    Mar 20, 2007
    Messages:
    879
    I think it should be amended, most pain in the rear end ranges do that. Mine only wants the brass if you are buying the reloaded ammo, and it's noted on the sign that it's all brass returned.

    Of course they don't police it, so you can take your brass home they wouldn't likely know unless a large amount of people do it.
     
  12. DAVE RICHARDS

    DAVE RICHARDS Member

    Joined:
    Jul 11, 2005
    Messages:
    129
    Ditto on someone elses comments on the aluminum ammo. most of my guns shoot it no problem. My XD and my CZ occasionally will choke on it. Very rarely though. Kel tec advises against it's use and it will choke m P-3AT and my fold up carbine.
     
  13. j2342

    j2342 Member

    Joined:
    Apr 26, 2006
    Messages:
    8
    I like the brass cased but avoid the aluminim

    its not scientific but I find the brass shoots as well as anyones FMJ 9mm for practice purposes, I find the alum. dirty burning crap that I have seen double rimmed 38's which thank goodness was long enough to lock up my gun before going off. first and only time i have seen a case malformed at the base to that degree, i also had a round that had a bad crimp on the bullet and was dangerous!
    cheap ranges like to sell it to you at the price of decent ammo 12 to 16bucks and you know they get it cheap as :evil:. I have seen a fair number of extraction issues with aluminim cases , so much so if i see a problem it's my first thouht , and often right. In my area you can buy 50 rounds of brass at wally world for 6.27 or if you have shoot at the one range it's like 12 bucks for the aluminum junk. my son's range charges 2 bucks a box for lead removal fee , per box. its a nice place with good people and i mean no insult but often I will go to wally world and pay the 2 bucks , 8.27 is pretty decent still I like it and its cheap I need to save money;). OH one word for 38's, it may have been a bad batch and i mean batch of like 500 or more? I have seen magtechs range ammo be a absolute pain in the butt. burrs at the crimp , I of course don't put in the really tight fit 38's, but those who did were pounding them out with sticks and crap, i had some that were tight after firing, but not horrible. but that stuff was junk and they never got it again as it was giving customers a bad experience, I have some nice magtech self defense ammo that is the eqaul of mos stuff in its price range i think. but the bottom of the line was truly bad. blaser brass I use as carry ammo in one 9 i have that wont accept hollows, I trust it to go off and feed and have hundreds if not 1k or more rounds fired to assure me it will. GL finding it can be hit or miss at wally world:)
     
    Last edited: Apr 13, 2007
Thread Status:
Not open for further replies.

Share This Page