9mm laser cartridge boresighter for Glock

[michiganfan]

Title says it all. Odered one off ebay and it would not allow the gun to go to battery. Anybody know of one that lets the gun slide close fully.

 

[egg250]

For what a laser bore sight is good for, I don't see the issue with the gun not going into battery. It is intended to get you on paper, not sight the gun in for you. Are you trying to zero some type of optics or laser sight for your Glock?

I'm not a gadget guy, but for the effective range of the weapon, I don't see the practicality of using a laser bore sight.

 

[RustHunter87]

you gotta load it from the mag like a regular round, what do you need a bore sight for with a glock?

 

[michiganfan]

For my Trijicon RMR. And why a difference from the mag as opposed to dropping it in the chamber and closing the slide. The dimensions don't change. All my other laser cartridges 223, 12 gauge and 7.62 all can be dropped in.

 

[michiganfan]

Edited. I double posted

 

[RustHunter87]

the cartage has to come up from the mag and slide behind the extractor because that is how its designed to feed, its a glock thing and it you just drop it in the extractor ends up on the wrong side of the rim, cycle you pistol by hand a few times and check out how it works

 

[rcmodel]

Single loaded, the Glock extractor will pop over the rim of a cartridge just fine & dandy.

That is not his problem.

If it doesn't fit, it doesn't fit.
And you must acquit.

rc

 

[RustHunter87]

As usual RC is correct, if the slide is pulled far enough are released it will pop over the rim, guess you just gotta let it slam home, my bad
but Im thinking that might ding up your laser up good shape