Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

9mm revolver question

Discussion in 'Handguns: Revolvers' started by dmarbell, Nov 8, 2006.

Thread Status:
Not open for further replies.
  1. dmarbell

    dmarbell Member

    Joined:
    Jul 23, 2006
    Messages:
    130
    Location:
    North Carolina
    I recently bought a Kel-Tec P11 for CCW gun. I also am in the market for a wheel gun, and I've been considering j-frame Smiths and SP101s. I did some reading today on the Taurus 905. Since I got the P11, I've been beating around getting a 9mm revolver, so I can buy one caliber of ammo.

    There a threads that give the Taurus 905 models bad reviews. The Rugers seem to get good reviews, but the moon clips give me some concern. Also, I haven't seen one for sale recently, and I'd bet the prices are high. The Smith revolvers in 9mm get good reviews, but for those prices I could get a small villa on Oahu!!

    It just looks like the 38s and 357s in the wheel guns are better bets, and just keep the speed loader ready for the snubby caliber. Does that sound about right? Also, I don't see buying the 38 sp. or +P guns when you can get the 357s and shoot the other ammo. The SP101s in 38 sp are a few bucks cheaper, it seems, than the 357 models.

    Danny
     
  2. Jack2427

    Jack2427 Member

    Joined:
    Jan 17, 2005
    Messages:
    410
    The Tarus revolvers are quite a mixed bag as far as QC is concerned. Some of them run like a swiss watch, some never work.
    Both the Rugers and S&W are excellent 9mm revolvers, I have a couple of both. You will need mooon clips in all but the Smith 547, which is collector pricey anyway. The moon clips are actually quite a bit faster to reload than speedloaders, and more compact to carry. Typically, I can fit two moon clips in the space needed for one speedloader.
    You can get near 357 punch out of the proper 9mm load. And practice ammo is dirt cheap. If you use 124-125 gr +P HPs for carry, and 124 gr NATO FMJ for practice your POI will be very close. Any of the9mm revolvers will wewigh about the same as your P11. If you do get a 9mm wheelgun, especially a SP101, or a Smith 940, I bet you will be carrying it more than the KT.
     
  3. EddieCoyle

    EddieCoyle Member

    Joined:
    Sep 17, 2005
    Messages:
    1,231
    Location:
    Massachusetts
    I've had enough bad luck with Taurus handguns to make me never buy one again. I know people that have them and love them, but I've owned three and had multiple problems with each.

    I have a S&W 547. It's a great shooter.
     
  4. gandog56

    gandog56 Member

    Joined:
    Apr 5, 2006
    Messages:
    782
    Location:
    Mobile, AL.
    The gun I am most accrate with (and I own a few!), is my 19 year old Taurus 66 .357 magnum. Did I get one that was the cream instead of the lemon, I don't know. But I woould trust my life with that gun, and that's all that matters.
     
  5. 461

    461 Member

    Joined:
    Mar 18, 2003
    Messages:
    1,133
    Location:
    NE.
    Much as I'd love to jump on the thread hijack bandwagon and take some shots at Taurus myself, I believe we were discussing 9mm wheelguns.

    I've got a 9mm wheelie (SP-101) and just love it. I think the lessened recoil of the 9mm over the .357 along with the weight of the SP makes for a great little shooter. I'm sold on the moonclips as well, they make for a superquick reload and very reliable extraction. I've had mine for over a year now and have a hard time finding anything not to love.
     
  6. ribbonstone

    ribbonstone Member

    Joined:
    Jan 26, 2006
    Messages:
    313
    Location:
    New Orleans
    Have had four..still have one. Ruger SS, S&W 940 3", 940 2', and a Ruger 101. Still have the Ruger 101. I like the concept, esp. when surplus 9mm ammo is/was so cheap. .357 is a better defence round, but the 9mm is about as much as can be shot well and fast with the MINIMUM size grip.

    But the only one you're likely to easily find would be the Taurus: they have a spotty reputaion for quaility control, so I'd become knolwedgable about revolvers and testing (the sticky on buying a used revolver is a good guide) efore buying even a NEW one.
     
    Last edited: Nov 10, 2006
  7. Confederate

    Confederate Member

    Joined:
    Feb 19, 2005
    Messages:
    3,103
    Location:
    Bethesda, MD
    You're correct about the expense. I advise getting a .38/.357 because the .38s are available at a good savings. Having said that, let price guide you there. I can't recommend Taurus if you'll be shooting a lot; the 9mm Ruger Speed-Six with the clips is a good way to go. Rounds can be loaded three at a time if memory serves. I know the Egyptian police used the Ruger 9mm and they did get good reviews.

    Still, being able to fire .357 is a real asset, especially if you travel with a weapon. (I've gotten to the point where I just won't go out in the wild without some sort of protection and for home protection, .38s are hard to beat.
     
  8. daBear

    daBear Member

    Joined:
    Nov 4, 2006
    Messages:
    8
    Location:
    In the Foothills Of The Canadian Rockies
    Some time ago I was lucky enough to score an Astra 357 Police 3in bbl NIB, which came with a second cylinder for 9mm. At one point they came with either a second cyl in 9mm Luger or 9mm Steyr. Reliability has been superb and for a small revolver is has been very accurate up to 10yds but beyond that it starts to wander. I have only seen a couple on the sale posts, and they often only have the 1 cylinder(357).. I'll probably be holding onto this little fella..
    Cheers:)
    dB
     
  9. ribbonstone

    ribbonstone Member

    Joined:
    Jan 26, 2006
    Messages:
    313
    Location:
    New Orleans
    Never know what the local used gun market is like.

    Found that Ruger 101 9mm on the used gun shelf in a local gunshop, prices a bit lower than a used .357 version becasue, "It's in 9mm and no one around here seems to want that caliber." Have .357's, but also had +900 rounds of Egyptian surplus 9mm that many of my autoloaders refused to fire on the first firing pin strike (hard primers).

    Took a chance the Ruger would fire them; it ate them all without a problem.

    Even without the dirt-cheap 9mm prices of a few years ago, the little Ruger is a useful addition....9mm cases are still basically free, the bullets as cheap as any .38special, primers cost the same no matter what round fires them, and the 9mm is stingy about powder weights. Still might be the least expensive centerfire revolver to feed.
     
  10. sgtb

    sgtb Member

    Joined:
    Dec 1, 2003
    Messages:
    157
    Location:
    Illinois
    I have a 9mm Speed six and love it.
     
  11. Moonclip

    Moonclip Member

    Joined:
    Apr 27, 2005
    Messages:
    2,766
    Location:
    USA
    My 2" model 940 is superior to my 2 3/4" speed six for some reason. 940 shoots to poa and does not have sticky extraction.
    I stupidly missed a 547 4" 2 years ago at $410 in CA

    Have never seen the Astra. I have passed Sp101s 9mm in CA due to rediculous prices, extreme abuse, or stupid customizations by non name gunsmiths.
     
  12. 0007

    0007 Member

    Joined:
    Dec 25, 2002
    Messages:
    909
    Location:
    Back in the USA
    DaBear -
    I bought my Astra with a 2" barrel more then 20 years ago. I sure wish it had come witha 9mm cylinder... That said, the wife took it away from me and I've neverbeen able to get it back. At 50 feet she will tear up 4" rug tubes until she gets tired of shooting.
     
Thread Status:
Not open for further replies.

Share This Page