Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A new pocket tool for c and b revolvers

Discussion in 'Blackpowder' started by Pancho, Apr 7, 2010.

Thread Status:
Not open for further replies.
  1. Pancho

    Pancho Member

    Joined:
    Oct 23, 2007
    Messages:
    1,874
    Location:
    Southwestern, Ohio out in the country about 40 mil
    It is a 2" piece of cooper tubing fitted with a brass blade. After possitioning the blass blade in the cooper tube you fill the tube with lead. The resulting tool acts as a lead filled soft hammer to drive the pin out and the blade is sized to be used as a pusher to push the pin all the way out.
     
  2. Pancho

    Pancho Member

    Joined:
    Oct 23, 2007
    Messages:
    1,874
    Location:
    Southwestern, Ohio out in the country about 40 mil

    Attached Files:

  3. madcratebuilder

    madcratebuilder Member

    Joined:
    Jul 15, 2007
    Messages:
    5,020
    Location:
    Northern Orygun
    Good one Pancho. I made a similar tool from hardwood. Drilled it and filled with lead, then plugged the hole. Sort of like a short starter but for the wedge.

    I think I like your idea better, more weight. The things us Colt shooters deal with:rolleyes:
     
Thread Status:
Not open for further replies.

Share This Page