Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A step backwards to move forward

Discussion in 'Handguns: Autoloaders' started by TimeIsRunninOut, Aug 15, 2012.

Thread Status:
Not open for further replies.
  1. TimeIsRunninOut

    TimeIsRunninOut Member

    Joined:
    May 8, 2009
    Messages:
    186
    Due to recent events unseen, I currently don't have a carry gun again. I am once again on a mission to find a good somewhat well rounded carry pistol. I am open to options in .380 acp, 9mm, and .45 acp with preference to the later two. I prefer single stack magazines and either a safety or decocker, after that I am unsure what I am interested in, so I am asking what you like and have seen that might make a suitable carry pistol.

    I tend to open carry, and have a budget around 800, but prefer to keep it around 600 if possible.
     
  2. smalls

    smalls Member

    Joined:
    Feb 8, 2011
    Messages:
    2,433
    Location:
    Macomb County, MI
    S&W 3rd gen auto or 1911 I guess would be my suggestions.
     
  3. 9mmepiphany

    9mmepiphany Moderator

    Joined:
    Dec 27, 2002
    Messages:
    18,479
    Location:
    northern california
    Except for your preference for a safety or decocker, I would have recommended a Kahr CW9 at right around $400...it splits carry time with my Springfirld Armory EMP, which is a bit out of your budget.

    Unfortunately, it doesn't have either as it it DAO and carries much like a revolver

    If you can find one on the used market, the H&K P7 is excellent and is right about where your price point is
     
  4. 12131

    12131 Member

    Joined:
    Dec 22, 2007
    Messages:
    1,541
    Location:
    God's Country (TEXAS)
    A CPO Sig P228 for about $600 would fit the bill (your requirements) nicely.

    And, for $780, a brand new Sig M11-A1, currently on order at Top Gun Supply.

    ETA: Sorry with my reading comprehension.:eek: Since you prefer single-stack, I'd say a Sig P225 or Sig P239.
     
    Last edited: Aug 16, 2012
  5. sidheshooter

    sidheshooter Member

    Joined:
    Dec 30, 2007
    Messages:
    1,963
    Location:
    NW
    As above, a 3rd gen smith, e.g. 3913, seems to be in line with your preferences. I have a DAO version (3953) that is reliable enough to make a Glock look like an alcoholic ex-wife by comparison.

    That said, if I were starting from scratch and after a single stack, I'd personally look hard at the new XDs in .45--assuming you can live with the grip safety as the only external geegaw. Google around for more rave reviews than anyone wants to read.
     
  6. critter

    critter Member

    Joined:
    Dec 24, 2002
    Messages:
    3,166
    Location:
    southeast AR
    Recently got an XDs. I second that opinion. Give it a look. VERY easy to conceal, quite accurate, 100% reliable and much easier to shoot than I thought it would be.
     
  7. TimeIsRunninOut

    TimeIsRunninOut Member

    Joined:
    May 8, 2009
    Messages:
    186
    I like the idea of the grip safety, I handled the SA XDS the other day. It is a very nice pistol, I noticed in some pictures it shows an extended magazine, is that an accessory or comes from factory?
     
  8. FMF Doc

    FMF Doc Member

    Joined:
    Sep 9, 2011
    Messages:
    582
    Location:
    NC
    I would second the Sig P225 if you want fullsize single stack 9mm. If you want something a little smaller and lighter the S&W M&P Shield is nice (my usual carry piece). If you want a .45 there are several 1911s in your price range. And don't overlook a Police trade-in Sig P220. Police trade-ins are usually carrried a lot but shot a little. They are a great bang for you buck.
     
  9. coalman

    coalman Member

    Joined:
    Mar 23, 2012
    Messages:
    670
    Requirements: CCW Single stack w/ decocker or manual safety:
    SIG P239 9mm
    SIG P220 Carry
    1911 <4.25" Filipino
    XD45 w/ manual safety
     
  10. KTXdm9

    KTXdm9 Member

    Joined:
    Mar 4, 2012
    Messages:
    528
    Location:
    Katy, TX
    Are you interested in polymer? I'm a big fan of my Shield. Comfy to carry, and great trigger out of the box.
     
  11. tlynch

    tlynch Member

    Joined:
    Apr 19, 2008
    Messages:
    33
    Location:
    Central Texas
    If you happened to be near Dallas, you could work a deal with this guy.

    I shot a friend's 910 once, and I found it very accurate. He used it as his carry gun.

    Regards,
    Tom
     
  12. Skribs

    Skribs Member

    Joined:
    Oct 29, 2010
    Messages:
    5,807
    Location:
    Lakewood, Washington
    I think the Shield is right up your alley...another option would be LC9. Both are single-stack and have a manual safety.
     
  13. TimeIsRunninOut

    TimeIsRunninOut Member

    Joined:
    May 8, 2009
    Messages:
    186
    I don't mind polymer at all, I handled a Sig 239 and the new 938. I was surprised at the thickness of the Sig pistols or is it just me? The guy at the gun store tried selling me a Ruger SR9c over the LC9. I am going to see if the LC9 is available for rental.
     
  14. TimeIsRunninOut

    TimeIsRunninOut Member

    Joined:
    May 8, 2009
    Messages:
    186
    Can't seem to find a rental in my city so I'm going to try calling around to get the price for one, how does the Ruger LC9 compare to similar sized pistols as far as reliability and recoil?
     
  15. CapnMac

    CapnMac Member

    Joined:
    Feb 27, 2009
    Messages:
    1,283
    Location:
    DFW (formerly Brazos County), Texas
    There's a SASS SIG 220 that keeps calling my name that would fit the bill, at least to my way of thinking.
     
  16. Plan2Live

    Plan2Live Member

    Joined:
    May 17, 2011
    Messages:
    1,637
    Location:
    Columbia, SC
    I can't tell from your opening post whether you have or have not carried in the past, part of it sounded like you have carried in the past. If you haven't, I've noticed that people new to carrying tend to lean towards the ultra thin models like the LC9 thinking something along those lines is the only way to conceal well. Experience has proven to me that a good holster and a great belt will allow you to hide almost anything. Experience has also shown me that I (me personally) don't shoot the ultra thin models as well as pistols with a somewhat fuller grip.

    But then you mention that you tend to open carry so I am confused about which paramters you are trying to hit. If you are open carrying it seems to me that thinness wouldn't be as big of a concern. I remain confused.

    I have carried an XDm 3.8 Compact and a Sig 239. I conceal them both equally well. I would look for a gun store that approaches guns, belts and holsters as a package and will allow you to try on various combinations to see what works best for you. Then try to shoot your top three choices before plunking down your hard earned money.

    Oh yeah, I forgot, gun stores don't approach guns/belts/holsters as a package that needs to be tried on by the buyer. Maybe someday.
     
    Last edited: Aug 19, 2012
  17. coalman

    coalman Member

    Joined:
    Mar 23, 2012
    Messages:
    670
    I wanted to comment on this since it's something I notice a lot: Many folks seem to focus on the carry part of the equation and not the application part of the equation. Sure, statistically, odds are low a CCW will be needed, but is that really the point in choosing a CCW?

    For me, my thought has become: I don't want to have the gun I regret having when I need it.

    So, I don't use "bug" size guns any more. I find a way to make the guns I shoot best work as a CCW. This starts with the right holster and a heavy belt, plus needing to dress around the gun sometimes. I can always make the Glock 26 work if the Glock 30 or 1911 won't.
     
  18. TimeIsRunninOut

    TimeIsRunninOut Member

    Joined:
    May 8, 2009
    Messages:
    186
    I was looking into the single stack pistols because I found it hard to manipulate the controls on my Glock 19. If I can find a double stack with a grip that I can get my hand around I think it could work for me.
     
  19. critter

    critter Member

    Joined:
    Dec 24, 2002
    Messages:
    3,166
    Location:
    southeast AR
    My XDs came with 2 standard mags (5 rounds + 1 in the chamber). Seven rounders with a grip sleeve are available from Springfield (and maybe other places).
     
  20. MikePaiN

    MikePaiN Member

    Joined:
    Apr 17, 2009
    Messages:
    1,029
    Location:
    CT, USA
    The Ruger SR9c is pretty much my "do-all" pistol. I carry it everyday, the pistol is very comfortable and ergonomic. At home it is kept close by for HD. With the the ability to accept 17 round mags the SRc has plenty of fire power in a SHTF scenario. Its also fun and accurate to shoot, so it gets lots of range time. Faultless reliability, too.
     
  21. Esoxchaser

    Esoxchaser Member

    Joined:
    Jun 7, 2012
    Messages:
    360
    Location:
    Motown
    Sig P938 or Springfield EMP. The P938 is a lot of firepower (7 + 1) in a very concealable package. The EMP is just a joy to hold and shoot, but a bit bulky to conceal in summer.
     
Thread Status:
Not open for further replies.

Share This Page