Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Adjustable scope mount/rings

Discussion in 'Shooting Gear and Storage' started by zdc1775, Mar 18, 2013.

Thread Status:
Not open for further replies.
  1. zdc1775

    zdc1775 Member

    Joined:
    Feb 26, 2011
    Messages:
    556
    Location:
    Alabama
    I have an air rifle that has some bad barrel droop and need an elevation adjustable scope mount or rings that fit a weaver base and are 30mm if rings. Its currently wearing a cheap scope that came with it that I have shimmed in the rear (four layers of beer can) to make it actuall shoot to POA. Just don't want to shim that much when I put a better and more expensive scope on it. Any suggestions before I have to basically bend the barrel back to true (which is what a very well respected air gun smith/tuner suggested)?
     
  2. Outlaw Man

    Outlaw Man Member

    Joined:
    Jan 18, 2007
    Messages:
    1,870
    Location:
    Cleaning my guns.
    I don't know of a particular set off the top of my head, but you should be able to find some that have some (~20 MOA or so) elevation built in.
     
  3. Haxby

    Haxby Member

    Joined:
    Jan 15, 2011
    Messages:
    992
    Check out Burris Signature Zee rings.
    And Leapers/UTG makes a mount that compensates for barrel droop. Don't know what guns it fits, or what yours is.
     
    Last edited: Mar 18, 2013
  4. zdc1775

    zdc1775 Member

    Joined:
    Feb 26, 2011
    Messages:
    556
    Location:
    Alabama
    The Leapers mounts that I have found while searching only work on 11 or 14mm dovetails. The Burris rings seem to be the only real option that I have found so far just hoping some of you more knowledgeable than me would know of something else
     
Thread Status:
Not open for further replies.

Share This Page