Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ambi-9mm's

Discussion in 'Handguns: Autoloaders' started by boo586, Apr 17, 2003.

Thread Status:
Not open for further replies.
  1. boo586

    boo586 Member

    Joined:
    Jan 3, 2003
    Messages:
    84
    Location:
    Indianapolis
    Hello everyone,

    I am going to be helping my brother in-law pick out a 9mm pistol here in the near future. He is left handed but his oon to be fiance is right handed and not very gun friendly, but will learn to use it since my BIL works swing shift and she is home alone at night quite often. So here is what I thinking he might want in a pistol.

    Full Size
    All Steel
    Fixed Sights
    Ambi Safety (capable)
    9mm

    We have looked at handguns before and here is what he has liked.

    Berreta 92
    Taurus 92 and 99
    Ruger P89

    He has shot a Glock 19 and hated it, but has shot a Rguer P95 and liked it; however, he prefers an all steel gun to absorb more of the recoil impulse. I was going to show him a CZ75, Hi-Power and Clones, Taurus PT911 and what else?

    What am I missing?

    Thanks,

    Boo586
     
  2. axeman_g

    axeman_g Member

    Joined:
    Jan 26, 2003
    Messages:
    1,153
    Location:
    South Jersey
    a lefty answers

    In my opinion dont let your friend discount polymer. I find some polymer guns to soak up more felt recoil due to flex. My suggestions

    Steyr M9 (underated, fastest firing and sight acquiring gun I own)
    Springfiled XD (I only hav the .40, but I like it alot. Very solid. If you can find a used HS2000 I would look at that gun also)
    CZ85 (accurate, steel, indestructable priced well)
    Walther p99 is ambi, but I hear things I dont like and it is expensive.

    I have owned all the guns you have mentioned. These are my current crop, and the ones I have enjoyed the most. I have always wished to like ruger grips, but they are just to big.

    Your friends girl will not like the beretta/taurus grips, they are two wide for women to shoot comfortably.
     
  3. 10-Ring

    10-Ring Member

    Joined:
    Dec 24, 2002
    Messages:
    12,037
    Location:
    California
    I would normally recommend a HK USP or USPc 9, but you stipulated all steel. In that case, I'll go to the USP's all steel cousin, the P7M8 :)
     
  4. marley

    marley Member

    Joined:
    Dec 27, 2002
    Messages:
    129
    Location:
    richmond,VA
    Your list says BHP practial
    full size
    all steel
    fixed sights
    ambi
    9mm
    It also works well for those with small hands.
    What your missing is a 1911 springfield or colt.
    Patrick
    :)
     
  5. Berg01

    Berg01 Member

    Joined:
    Mar 24, 2003
    Messages:
    712
    When you say "all steel", do you mean to include the Beretta 92-series, which has an alloy frame?

    Direct from the Beretta Website;

    92 Series Pistols are semi-automatics and operate on the short recoil, delayed locking block system, which yields a faster cycle time and delivers exceptional accuracy and reliability. Each features a lightweight, forged frame made from aircraft-quality aluminum alloy. All 92 series pistols feature unique safety refinements. On FS models, the manual safety also functions as a decocking lever. A firing pin block secures the firing pin. The chamber loaded indicator is visible or can be felt by touch.

    If you want to stick with steel framed guns, try the CZ 85B (ambi slide release and safety version of the 75B).

    From the CZ Website;

    The design of the CZ 85B stems from the popular CZ 75 line. The CZ 85B has ambidextrous safeties and slide stop. The CZ 85 B version is complemented with a firing pin block safety to further enhance the safety of the firearm.

    If you want to include alloy-framed guns, of your choices, I am most familiar with the Beretta 92FS, and would recommend that one. But (IMHO), of the steel framed guns, based on your criteria, I would go with the CZ 85B.
     
  6. critter

    critter Member

    Joined:
    Dec 24, 2002
    Messages:
    3,167
    Location:
    southeast AR
    LK P7 M8!!!!!!!!
     
  7. Litlman

    Litlman Member

    Joined:
    Dec 27, 2002
    Messages:
    789
    Location:
    N.E Pa
    BHP, CZ 85, P7m8....
     
  8. tobeat1

    tobeat1 Member

    Joined:
    Dec 26, 2002
    Messages:
    123
    P7M8 or (hehe) a 9mm STI Trojan. :cool:
     
  9. cratz2

    cratz2 Member

    Joined:
    Dec 24, 2002
    Messages:
    4,233
    Location:
    Central IN
    Hello from a fellow Hoosier! :D

    I'm a 1911 guy but have a Taurus PT99AF (adjustable sights) that has been the most consistantly reliable gun I've ever owned. Ambi safety in the proper location, very reliable, good value. My wife is 5'2" and obviously has small hands. She doesn't think the Taurus is the most comfortable gun ever but she can shoot it just fine. For comfort, I really like the CZ75 and EAA Witness guns, alsy consistantly reliable and good values.
     
  10. George Hill

    George Hill Member

    Joined:
    Dec 22, 2002
    Messages:
    6,842
    Location:
    Uintah Basin, UT
    Look at the new Kahr T9.
     
  11. John G

    John G Member

    Joined:
    Dec 24, 2002
    Messages:
    566
    Location:
    Western NY
    Sounds like the Browning Hi-Power fits the bill. My lefty friend loves shooting it, and it's a classic.
     
  12. boo586

    boo586 Member

    Joined:
    Jan 3, 2003
    Messages:
    84
    Location:
    Indianapolis
    Thanks everyone!!

    I had forgotten about the all steel witness guns. Can an ambi-safety be installed on the Feg Hi Power Clones fairly easily?

    The new kahr would be great, but no external safety on the gun so that one is probably a no go.

    He's looked at the P7M8, way out of his price range, but after holding one he knew he shouldn't of!!!

    What about a used S&W? Any particular ones come to mind??

    Thanks,

    Boo586
     
  13. treeprof

    treeprof Member

    Joined:
    Dec 31, 2002
    Messages:
    773
    Location:
    Ohio
    Consider the CZ 85 Combat. It does have adj sights, but there's no need to fuss with it to get the mags to free-fall (no biggie to do yourself, tho), adj. for trigger travel and no stoopid firing pin block, which makes stripping and cleaning a whole lot easier. The extended mag release may be easier to manipulate as a lefty as well (you might be able to work it with the flat of your fingner, rather than the tip. Hmm, I'm gonig to have to try it on mine).
     
  14. M1911

    M1911 Member

    Joined:
    Dec 24, 2002
    Messages:
    1,050
    Look at the Smith & Wesson third generation pistols -- they have ambi safeties/decockers. I can't keep their numbering scheme straight, so look at their web site.
     
  15. 10-Ring

    10-Ring Member

    Joined:
    Dec 24, 2002
    Messages:
    12,037
    Location:
    California
    I budget is an issue, I'd recommend a CZ ;)
     
  16. Berg01

    Berg01 Member

    Joined:
    Mar 24, 2003
    Messages:
    712
    Smith & Wesson 5906 is an all steel full size (DA/SA) 9mm; I've seen a lot of these as LEO trade ins at the local gun shops at very reasonable prices. They are solid guns. In addition, S&W has the 910 (matte) and 910s (stainless) "value" line of their full size 9mm guns; these have the alloy frame. These are accurate and reliable guns that are definitely worth looking at.
     
  17. BLiTzNicK

    BLiTzNicK Member

    Joined:
    Jan 2, 2003
    Messages:
    141
    Location:
    Kentucky
    As far as I know.
     
  18. dude

    dude Member

    Joined:
    Jan 10, 2003
    Messages:
    765
    Location:
    Oregon's Outback
    P7M8

    the ultimate 'ambi' pistol
     
Thread Status:
Not open for further replies.

Share This Page