Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

American Gun Company double barrel shotgun

Discussion in 'Firearms Research' started by travisd, Jul 11, 2011.

Thread Status:
Not open for further replies.
  1. travisd

    travisd Member

    Joined:
    May 19, 2011
    Messages:
    333
    Location:
    South Dakota
    We have an old double barrel shotgun in 12 ga. It has external hammers. It says "American Gun Co. New York" on the side of the gun and "genuine armory steel" and "choke bored" on one of the barrels. Serial number is 141653. Hoping someone can tell me more about it and when it was made and so on.
     

    Attached Files:

    Last edited: Jul 11, 2011
  2. SDC

    SDC Member

    Joined:
    Jan 8, 2003
    Messages:
    3,116
    Location:
    People's Republic of Canada
    "The American Gun Company" was a trade-name used by the Crescent Firearms Company between 1893 and the 1930s, and they both made their own firearms and imported them from Europe (usually Belgium); if there are any proof-marks on the water table (the flat parts visible when you open up the breech, top and bottom) this will be an imported gun.
     
  3. Vaarok

    Vaarok Member

    Joined:
    Dec 13, 2006
    Messages:
    1,887
    Location:
    Varies
    Common double-gun, I've owned a couple I got for pittance. If they're not damascene, they're an unimpressive and inexpensive shotgun. I wouldn't put hot 2-3/4 loads through them on principle, but for birdshot they work just fine.
     
  4. GCBurner

    GCBurner Member

    Joined:
    Nov 18, 2010
    Messages:
    1,853
    I noticed one of these the other day, hanging over the dining room fireplace in the local Cracker Barrel restaurant.
     
  5. dogrunner

    dogrunner Member

    Joined:
    Dec 13, 2006
    Messages:
    1,187
    Location:
    E/Cntrl Fla.
    FYI: Numrich, aka Gun Parts, has quite a few parts for those old Crescent FA. I just repaired a side lock hammerless marked "Knickerbocker" for a buddy. THing was missing it's main spring, sear spring and plunger for the right sidelock......Numrich surprised me by having originals in stock.......
     
  6. travisd

    travisd Member

    Joined:
    May 19, 2011
    Messages:
    333
    Location:
    South Dakota
    Yeah its nothing fancy its in pretty rough shape but its still a sweet gun. I've needed parts before and i've always had good luck with Numrich.
     
Thread Status:
Not open for further replies.

Share This Page