Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Annoying Barrel Bands

Discussion in 'Rifle Country' started by Silent-Snail, Oct 4, 2004.

Thread Status:
Not open for further replies.
  1. Silent-Snail

    Silent-Snail Member

    Joined:
    Aug 28, 2004
    Messages:
    451
    Location:
    On the front just behind the Cheddar Curtain
    I have a MN 91/30, and am extremely interested in fully disassembling it but I cant get either of the barrel bands off. Help me members of THR you're my only hope. :evil:
     
  2. Mulliga

    Mulliga Member

    Joined:
    Jan 13, 2004
    Messages:
    2,251
    Location:
    Gainesville, Florida
    Most of the time they are on there pretty tight. Getting them out on a friend's 91/30 was an experience. Quite hard to do it without damaging the stock.

    Basically, we ending up taking a screwdriver and hammer and prying the damn things off by force - I held down the release latch thingy, and my friend slowly bumped the rings upward using the aforementioned screwdriver for leverage. Scratched the wood up slightly, but, hey, it's a rifle, not a china plate. :)

    I'm sure a more experienced Mosin fan will come around shortly to tell you of a better way to do it. ;)
     
  3. pbhome71

    pbhome71 Member

    Joined:
    Nov 11, 2003
    Messages:
    897
    I use a c-clamp to clamp over the retainer. Then carefully tap the barrel band out with a block of wood.
     
  4. Okiecruffler

    Okiecruffler Member

    Joined:
    Dec 27, 2002
    Messages:
    3,351
    Location:
    Del City, Okla
    I'll second the c-clamp and block of wood. I use pieces of cardboard between the clamp and the wood to help save that.
     
  5. WhoKnowsWho

    WhoKnowsWho Member

    Joined:
    Dec 25, 2002
    Messages:
    3,432
    Location:
    Maricopa, AZ
    Some sort of C-clamp or mutant third hand, and I used a brass punch and brass hammer to move them on down.
     
  6. MN_Strelok

    MN_Strelok Member

    Joined:
    Dec 24, 2002
    Messages:
    93
    Location:
    IL
    Much like the others, I use a hammer, wooden wedge or dowel, c-clamp and some denim to protect the stock.

    The only other word of advice I can offer is to get one of those small mallets that is rubber on one side and plastic on the other. With some practice, you can use the rubber side to strike the band itself pretty hard without damaging the rifle. (If the retention spring isn't gummed up too bad, I can get the band off this way without a c-clamp. They're usually filthy though.)

    It also seems easiest to work the band off by hitting one side, then the other.
     
  7. Okiecruffler

    Okiecruffler Member

    Joined:
    Dec 27, 2002
    Messages:
    3,351
    Location:
    Del City, Okla
    It also helps if while tapping the band off you bite your lower lip, just a little left of center. That's how I do it anyway.
     
  8. Silent-Snail

    Silent-Snail Member

    Joined:
    Aug 28, 2004
    Messages:
    451
    Location:
    On the front just behind the Cheddar Curtain
    Thanks for the advice it will be implimented as soon as I get paid. A problem that I forgot to mention earlier is that the thing that keeps the forward band on wont depress far enough for me to even move the front band. Is this what the C clamps are for
     
Thread Status:
Not open for further replies.

Share This Page