Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Another Idea

Discussion in 'Handloading and Reloading' started by emmett dunham, Feb 14, 2011.

Thread Status:
Not open for further replies.
  1. emmett dunham

    emmett dunham Member

    Joined:
    Jan 31, 2010
    Messages:
    16
    This makes a tool removalble from the bench top and storable.


    The first picture notice the marked circle that will be larger than the bolt win the accessories are attached to the bench for ease of installation. There is a threaded anchor screwed into a hole in the bottom of the bench for attachment. The second picture is two tools I have made a mount to attach to the bench with the bolt to hold them in place. The third and forth picture is to give the idea of the tool installed and how the mount was constructed. The mount is strong with just one bolt and with two or three could handle something requiring a larger base and that needed additional strength for heavy work.


    DSCN0200.gif

    DSCN0199.gif

    DSCN0202.gif

    DSCN0203.gif
     
    Last edited: Feb 15, 2011
  2. Hondo 60
    • Contributing Member

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,378
    Location:
    Manitowoc, WI
    Very nice!

    Thanks for sharing.
     
  3. bds
    • Contributing Member

    bds Member

    Joined:
    Jan 10, 2010
    Messages:
    14,931
    Location:
    Northwest Coast
Thread Status:
Not open for further replies.

Share This Page