Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Another new bullet -

Discussion in 'Handloading and Reloading' started by MissouriBullet, Jun 14, 2010.

Thread Status:
Not open for further replies.
  1. MissouriBullet

    MissouriBullet Member

    Joined:
    Nov 2, 2008
    Messages:
    637
    Location:
    Western Missouri, on rural property
    This one is a 135 grain RN .38 Super bevel-base bullet and we are sizing them to .357. Optional sizing to .356 upon request, of course. As is the case with all of our bullets, we will custom-size for you, assuming we have the necessary die (usually, we do.)

    Up on the website tonight after first shift finishes at 1600.

    Just an FYI.

    Brad
     
  2. 101VooDoo

    101VooDoo Member

    Joined:
    Jan 18, 2010
    Messages:
    24
    Location:
    Nevada
    Brad, how do you request a custom-sizing or particular BHN on an order?

    Jim
     
  3. joneb

    joneb Member

    Joined:
    Aug 18, 2005
    Messages:
    3,773
    Location:
    Oregon
    Hey Brad, do you make a bullet for the .327 Fed. mag. yet ? say something in the 18 BHN range.
     
  4. MissouriBullet

    MissouriBullet Member

    Joined:
    Nov 2, 2008
    Messages:
    637
    Location:
    Western Missouri, on rural property
    Simple - just write the special request on a hundred dollar bill and I'll take care of it :)

    Order online (not forgetting, of course, to enter the top-secret THR discount code worth 5% off your order) and include a note in the 'Comments' section of the form. That way we will see the note once your order is verified (paid for) and we'll handle it.

    Thank you!

    Brad
     
  5. MissouriBullet

    MissouriBullet Member

    Joined:
    Nov 2, 2008
    Messages:
    637
    Location:
    Western Missouri, on rural property
    What is the nominal groove diameter of that gun? The hardness won't be a problem.
     
  6. MissouriBullet

    MissouriBullet Member

    Joined:
    Nov 2, 2008
    Messages:
    637
    Location:
    Western Missouri, on rural property
  7. joneb

    joneb Member

    Joined:
    Aug 18, 2005
    Messages:
    3,773
    Location:
    Oregon
    I'm not sure but it should be the same as the 32 H&R mag. I don't have a firearm chambered for this cartridge yet, but a 4" GP 100 is very appealing.
    There seems to be a shortage of jacketed bullets for this cartridge and I thought of you as one that could help fill the void.
    You might contact Ruger concerning the ideal cast bullet diameter.
     
  8. 101VooDoo

    101VooDoo Member

    Joined:
    Jan 18, 2010
    Messages:
    24
    Location:
    Nevada
    Ya know, I bet that $100 bill trick works every time -

    Jim
     
  9. depoloni

    depoloni Member

    Joined:
    May 24, 2008
    Messages:
    289
    Location:
    Michigan
    Call me crazy, but I'm pretty sure if you sent him a note on a $100 bill you'd end up with a "mystery" extra $100 in bullets you ordered. And maybe a scolding. :D

    Good stuff. Still one of two commercial casters' bullets I use. Despite getting big into casting for myself in the last 2 years. LOL. Damn your bullets. At best I use them as the baseline ruler against which my own are measured in terms of accuracy and consistency.
     
  10. qajaq59

    qajaq59 Member

    Joined:
    Dec 7, 2005
    Messages:
    2,375
    Location:
    S. C. Florida
    Brad if you ever give up the casting bullets you should do courses on how to run a business.............
     
  11. MissouriBullet

    MissouriBullet Member

    Joined:
    Nov 2, 2008
    Messages:
    637
    Location:
    Western Missouri, on rural property
    It would be a short course, qajaq, with just two things in it: "Common sense" and "The Golden Rule."
     
  12. MissouriBullet

    MissouriBullet Member

    Joined:
    Nov 2, 2008
    Messages:
    637
    Location:
    Western Missouri, on rural property
    No, I'm still waiting for it to work the first time.
     
  13. qajaq59

    qajaq59 Member

    Joined:
    Dec 7, 2005
    Messages:
    2,375
    Location:
    S. C. Florida
    Somebody send him the $100 bill so we can see if it works.............. I would, but I don't have any bills that small. LOL
     
Thread Status:
Not open for further replies.

Share This Page