Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Any Chargemaster Owners

Discussion in 'Handloading and Reloading' started by Grimshaw, Oct 3, 2012.

Thread Status:
Not open for further replies.
  1. Grimshaw

    Grimshaw Member

    Joined:
    Sep 21, 2012
    Messages:
    46
    Location:
    Florida
    Are there any pointers on this,should the inside of the powder tube be rubbed down with a dryer sheet to control static and powder clinging inside when new?


    [​IMG]
     
  2. wardor

    wardor Member

    Joined:
    Sep 6, 2012
    Messages:
    54
    Location:
    NC
    little soap film on all my powder hoppers... just take a mild soap/water mixture and wipe it down and let it dry.
     
  3. Grimshaw

    Grimshaw Member

    Joined:
    Sep 21, 2012
    Messages:
    46
    Location:
    Florida
    Ok Thank You
     
  4. Shmackey

    Shmackey Member

    Joined:
    Dec 24, 2002
    Messages:
    1,477
    Location:
    Colorado
    Look up how to program the timing of the three speeds to tailor it for your particular load. It will be far faster. Also look up how to insert a straw in the end to avoid hassles with the threads and stick powders.
     
  5. MrCountyCop

    MrCountyCop Member

    Joined:
    Sep 10, 2011
    Messages:
    67
    Location:
    Central, Kansas
    Don't leave bullseye in it over night.....EVER.
    First mistake I made the day I got mine.
     
  6. nastynatesfish

    nastynatesfish Member

    Joined:
    Nov 28, 2009
    Messages:
    964
    Location:
    Thatcher arizona
    Sure wish you could make it stop beeping or lower the volume on it when it's done charging.
     
  7. Grimshaw

    Grimshaw Member

    Joined:
    Sep 21, 2012
    Messages:
    46
    Location:
    Florida
    Mute That Annoying Beep
    Some ChargeMaster users complain about the loud beep at the end of each cycle. There’s a simple way to silence the beep — and you don’t have to cut any wires or permanently disable the speaker. To mute the beep, simply hold down the Zero button until “beep off” displays. Repeat to restore the beep function.
     
  8. Grimshaw

    Grimshaw Member

    Joined:
    Sep 21, 2012
    Messages:
    46
    Location:
    Florida
    After draining your powder dont for get to close the drain spout :cuss:
    I havent done it,just saying.
     
  9. MovedWest

    MovedWest Member

    Joined:
    Feb 8, 2009
    Messages:
    493
    Location:
    Silicon Valley
  10. Shmackey

    Shmackey Member

    Joined:
    Dec 24, 2002
    Messages:
    1,477
    Location:
    Colorado
    I've done it three or four times.
     
  11. dragon813gt

    dragon813gt Member

    Joined:
    Jun 30, 2011
    Messages:
    1,137
    The static isn't a big deal. Not a lot sticks. And you'll be emptying it when you're finished. The brush easily knocks it all off the sides.


    Brought to you by TapaTalk.
     
  12. powell&hyde

    powell&hyde Member

    Joined:
    Jan 17, 2011
    Messages:
    238
    Location:
    Iowa
    Yup, a little dab of dish wash soap and a rag wringed out works great. Better yet is a small spray bottle with a few drops of soap and water and sprayed on a rag to wipe the hopper works great.
     
  13. Grimshaw

    Grimshaw Member

    Joined:
    Sep 21, 2012
    Messages:
    46
    Location:
    Florida
  14. Offfhand

    Offfhand Member

    Joined:
    Apr 12, 2009
    Messages:
    1,131
    A post from above"

    "After draining your powder dont for get to close the drain spout"

    The voice of experience has spoken, and it's the most useful thing you'll learn on this thread. So take heed.
     
Thread Status:
Not open for further replies.

Share This Page