Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Any info on a Hungarian derringer?

Discussion in 'Firearms Research' started by SDC, Jun 22, 2009.

Thread Status:
Not open for further replies.
  1. SDC

    SDC Member

    Joined:
    Jan 8, 2003
    Messages:
    3,116
    Location:
    People's Republic of Canada
    Hi all; I've searched all of my books, and ran Google into the ground looking for any additional information on this oddball "squeeze pistol"/derringer, but haven't found much. All I know is that it's 96mm long with a 81mm barrel, that it was built by "Teknika" in Hungary, and it was designed by a fellow named "Брайнер" (which can be variously translated as "Briner", "Bryner", "Brajner", "Brayner", etc., etc.) If anyone has anything to add on this thing, I'd be glad to hear it, especially on the inner workings.

    [​IMG]
     
  2. SDC

    SDC Member

    Joined:
    Jan 8, 2003
    Messages:
    3,116
    Location:
    People's Republic of Canada
    I kept on digging, and found parts of a patent drawing for this thing, but if anyone runs across anything else, I'd be interested in hearing about it. It was apparently built as a 5-shot repeater in 9mm Makarov and 9mm Para.

    [​IMG]
     
    Last edited: Jun 27, 2009
  3. Owen Meany

    Owen Meany Member

    Joined:
    Jan 5, 2008
    Messages:
    86
    That is truly fascinating. I, too, look forward to any additional information that may surface.

    You say it fired either the 9x18mm or 9x19mm calibers? Boy, that sounds like a handful - I don't think I'd want to touch one off out of a package that size!

    By the way, do you own the gun pictured?
     
  4. rondog

    rondog Member

    Joined:
    Jun 29, 2007
    Messages:
    6,788
    Location:
    Commurado
    Probably a pocket gun for spies or spooks of some sort. 9x18 mak? Ouch! My PA-63 kicks hard enough, I can't imagine what the thing would feel like. Cool collectible though.
     
  5. SDC

    SDC Member

    Joined:
    Jan 8, 2003
    Messages:
    3,116
    Location:
    People's Republic of Canada
    No, I don't own one, but my interest was piqued after seeing the first picture; probably the main reason that these are basically unknown is because they wouldn't have been importable into the US . Another couple of oddballs I've run across are the TKB-506 and TKB-506A, two "cigarette case guns " made for the KGB/MVD, that fired a 7.62x35 SP-2 silenced cartridge with an internal captive piston. These were designed by Igor Stechkin, the designer of the APS machine pistol.

    [​IMG]

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page