Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Anybody using MBC lead bullets in 380 Auto?

Discussion in 'Handloading and Reloading' started by sharptailhunter, May 19, 2010.

Thread Status:
Not open for further replies.
  1. sharptailhunter

    sharptailhunter Member

    Joined:
    Apr 19, 2010
    Messages:
    40
    I'm considering buying a Sig P238. I've shot it and really enjoyed it. I've recently been using MBC LSWCs for my .40 and I absolutely love them. I see that they make one bullet for the 380 (90 gr. RN).

    So, my final hurdle before buying the gun is to be sure that those bullets would work alright in the Sig. I ask because I have done a lot of research on the Sig and there are some reports of failure to feed or failure to extract. Of course, as with most www. entries, it seems only the negative ones end up on the screen. I didn't have a bit of trouble with the one I shot today. Also, some of you may be saying, it's just a 380, you can't be accurate with it anyway. I don't know what accurate is but I put the first 10 rounds I have ever fired with a 380 into the 2"x2" center square of the target with the total group size being right at 1.5". The Sig is one nice little shooting gun.

    Thanks in advance for your replies.
     
  2. Drthelongshot

    Drthelongshot Member

    Joined:
    Jul 16, 2009
    Messages:
    21
    I don't have a sig, but they function and are accurate in my bersa and LCP.
     
  3. tom357mag

    tom357mag Member

    Joined:
    Sep 21, 2009
    Messages:
    135
    Location:
    Richlandtown , PA.
    +1 on the .380 LCP & Keltec P3AT. Very accurate to 9 yards for me.
     
Thread Status:
Not open for further replies.

Share This Page