Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Anyone have the Hornady LnL Case Trimmer Machine??

Discussion in 'Handloading and Reloading' started by Rule3, Jan 17, 2013.

Thread Status:
Not open for further replies.
  1. Rule3

    Rule3 Member

    Joined:
    Jan 26, 2010
    Messages:
    5,014
    Location:
    Florida
    I have a RCBS manual case trimmer which works fine and easy to use but for large quantities it gets "old" real quick. I have the drill adapter but that is real inconvenient to insert every time (just a hex head drive rod) and pick up the drill etc etc.

    So I can trim a few cases fine, then still need to de burr. I have the 3 way cutter for 223 which is great for a bolt action but trimming 100's of rounds is not fun.

    Those Worlds Best trimmers look great but I do not want to buy one for every caliber and still have to manually de burr chamfer.

    So I was looking at this really expensive machine
    Like $400 from a retail place

    Is it worth it????


    http://www.hornady.com/store/Lock-N-Load-Power-Case-Prep-Center/

    __________________
     
  2. gilly6993

    gilly6993 Member

    Joined:
    Sep 4, 2010
    Messages:
    56
    It's a good machine but very pricey....I prefer the wft and a tumble....
     
    Last edited: Jan 17, 2013
  3. tcj

    tcj Member

    Joined:
    Aug 25, 2012
    Messages:
    203
    I've got one and like it. Right now I only use it for 30.06 but it is fast and very stable (bolted down).

    Only takes a couple of seconds per piece of brass.
     
  4. Rule3

    Rule3 Member

    Joined:
    Jan 26, 2010
    Messages:
    5,014
    Location:
    Florida
  5. Red is Dead

    Red is Dead Member

    Joined:
    Mar 14, 2011
    Messages:
    19
    Location:
    Albion, Ne
    Just got one for Christmas and I love it!!! Won't process brass any other way now.
     
Thread Status:
Not open for further replies.

Share This Page