Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AR Upper Reciever compatability?

Discussion in 'Rifle Country' started by camoman33935, Jul 19, 2010.

Thread Status:
Not open for further replies.
  1. camoman33935

    camoman33935 Member

    Joined:
    Jul 21, 2008
    Messages:
    326
    Location:
    SW Florida
    Hey yall,

    I have a quick question or two. I have a DPMS A2 16" upper in 5.56. It has the fixed carry handle which is the only thing that I don't like about it. So what I want to do is take the barrel off the upper and put it on a flat top upper reciever from Bravo Company.

    Here's my question:

    Would I buy the upper reciever with M4 feed ramps or rifle feedramps? I see that it says for the M4 feedramps that it's to be used with a barrel that has M4 barrel extensions but I am unsure whether or not my barrel has them or a standard extension.

    Here's a link to the complete upper that I already have in case yall need to know exactly which one I have:

    http://www.midwayusa.com/viewProduct/?productNumber=999919

    Thanks for all yalls help
     
  2. shagmcnasty

    shagmcnasty Member

    Joined:
    Feb 14, 2010
    Messages:
    18
    Location:
    oklahoma
    Take a look at the upper you have now if the feedramps are machined into both the extension and upper you have M4 feedramps if the are machined into the extension only they are not.
     
Thread Status:
Not open for further replies.

Share This Page