Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ar15 collapsible stock parts

Discussion in 'Gunsmithing and Repairs' started by greyling22, Dec 27, 2012.

Thread Status:
Not open for further replies.
  1. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,366
    Location:
    East Texas
    does anybody know where I can buy parts to a basic ar15 collapsible stock? I was given one that had been screwed up. Somebody drove out the pins and messed up the threads on the screw for the quick adjustment lever. I would like to buy the 2 pins and the screw.

    Bare minimum I would like to know what thread pitch that screw is so I can get the right tap to try and clean the threads up on. I can probably make pins out of nails.
     

    Attached Files:

  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
  3. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,366
    Location:
    East Texas
    thanks RC. Couldn't find the name of that thing, and couldn't find it at brownells. (it was hiding under pins, not butstocks parts)
     
  4. cbmax

    cbmax Member

    Joined:
    Mar 3, 2006
    Messages:
    309
    Location:
    IL
    I'd just buy yourself another collapsible stock and be done with it.
     
  5. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    You mean you would throw away a $100 stock because it needs a $12 part??

    I'd like to go dumpster diving at your house!

    rc
     
  6. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,366
    Location:
    East Texas
    I'm going to see if I can recut the threads first, but they're pretty much gone on 2 sides, and when you combine that with the hole in the nut for a pin to go throughit starts skipping threads instead of screwing on.

    I wish I could find a $6 dpms part instead of a $12 colt part though :) Do you think this is it? http://www.gunpartscorp.com/Products/293930A.htm it's under car15 instead of ar15.
     
  7. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Probably.

    Any idea what brand of stock it is??

    rc
     
  8. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,366
    Location:
    East Texas
    nope. no markings whatsoever. the circular spot where a marking usually would be is blank. But most importantly, it's free.
     
  9. cbmax

    cbmax Member

    Joined:
    Mar 3, 2006
    Messages:
    309
    Location:
    IL
    That is a very basic six position stock and can be had for $50. Buy the time you track down the right screw and make sure the existing stock has not been damaged, you would be well served going new. Sorry, just my two cents!
     
Thread Status:
Not open for further replies.

Share This Page