Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Are there still savings in shotgun shells?

Discussion in 'Handloading and Reloading' started by eldon519, Sep 22, 2008.

Thread Status:
Not open for further replies.
  1. eldon519

    eldon519 Member

    Joined:
    Jul 21, 2005
    Messages:
    2,449
    Location:
    Georgia
    I've been reloading rifle and handgun rounds for years, but I've started to grow more interest in shotgun sports and hunting (dove, quail, rabbit, etc) to the point where I'm considering getting into reloading shells.

    I recently talked to an old timer who'd been at it for years, and he told me there isn't much to be saved with shotgun shells these days and raw material costs.

    Can anyone fill me in on the economics of shotgun shooting? The majority would be lead 2.75" 12 gauge loads of 6, 7.5 or 8 shot. Pretty standard field/sport loads. Locally it's around $5-$5.50 a box.

    Thanks in advance.
     
  2. bullseye308

    bullseye308 Member

    Joined:
    Nov 24, 2007
    Messages:
    1,386
    Location:
    Smyrna Tennessee
    Wally mart has them for 20.00/100. From those I have heard of that load shotgun, you won't save anything at todays prices unless you load the more expensive loads. Just to load for trap/skeet would not be worth it IMHO.


    Don't take my word for it, I have been wrong twice this year already.
     
  3. swampshooter

    swampshooter Member

    Joined:
    Sep 7, 2008
    Messages:
    126
    if you shoot cheap shells you won't save more than .50 or at most 1.00 per box. if you load quality shotshells and compare them to the cost of AA's then you will save another $1.00 or so.
     
  4. Bush Pilot

    Bush Pilot Member

    Joined:
    Oct 17, 2007
    Messages:
    1,595
    +1 on the Wal Mart thing. When it looked like prices were skyrocketing, I started buying a few 100 packs of shells everytime I went in (around 16 and change) I ran the numbers and the savings don't justify loading shotshells again. BTW, I don't load premium or speciality shells, I may rethink my position if I did.
     
  5. Crazy Fingers

    Crazy Fingers member

    Joined:
    Sep 4, 2008
    Messages:
    243
    You can actually save a good amount of money if you are smart.

    If you go to the LGS and buy reloading components, then you will not save any money.

    If you do not buy a HUGE purchase all at once, you will not save any money.

    If you use the big name reloading components (remington, winchester, etc.) you will not save any money.

    If you do not scrounge hulls from the range, you will not save any money.

    If you do not shop around like a madman, calling everybody, checking every website, trying to make every single penny count, and do not buy until you are certain you have the absolute most rock bottom price, then you will not save any money.


    That being said, if you buy clone wads, shoot 7/8 oz loads for clays, buy at least 8 lbs of powder at a time, thousands of the cheapest import primers you can get, and be very selective about where you buy your shot (The current spread that I can find online is a high of $67+shipping and a low of $32 shipped) then you can save a ton.

    Currently I am shooting for about $3.25 a box.
     
  6. VonFatman

    VonFatman Member

    Joined:
    Jan 21, 2004
    Messages:
    397
    Location:
    Just a Smidge outside of Kansas City
    I think another variable would be your chosen gauge. If you shoot a 28 or a 16 or some more obscure gauge, then I'm guessing reloading would be more economical. Just like some of the "odd" calibers we sometimes reload.

    Bob
     
  7. eldon519

    eldon519 Member

    Joined:
    Jul 21, 2005
    Messages:
    2,449
    Location:
    Georgia
    Thanks for weighing in on that. It sounds like I might be better off using the money I'd spend on shell reloading equipment to get into bullet casting instead. It seems there is quite a bit to be saved there.
     
  8. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,477
    Location:
    Happy Valley, UT
    Lead-free waterfowl loads are like 3 bucks a pop at Cabela's... could you reload them for cheaper or is bismuth or whatever shot even available in bulk?
     
  9. ants

    ants Member

    Joined:
    Nov 24, 2007
    Messages:
    3,503
    As stated above: The more unusual your need, the more you save. But you can also taylor a specific load to your shotgun for specific purpose.

    At $5 per box I make shotshells that shoot a beautiful pattern from my particular shotgun for sporting clays, with reduced recoil. I shoot more rounds with more comfort and keep more shots on target. For the same $5 per box at WalMart, my shoulder gets a workout and feels like it wants to quite after shooting through the stations. [And I save another $1 per box by using reclaimed shot for practice loads, although it's getting harder to find it lately.]

    But be patient in learning your craft, and be patient in finding that perfect load. It can take longer than finding the right load for rifle or pistol.
     
  10. NuJudge

    NuJudge Member

    Joined:
    May 20, 2006
    Messages:
    748
    Location:
    SE Michigan
    1KPerDay:
    You can reload Steel and Bismuth/Tungsten/etc. I have done a lot of it. You can get performance better than factory ammo at cheaper prices, but be ready to weigh every powder charge, every shot charge, and the press will be of only slight assistance during loading.

    I get my components here:
    http://www.reloadingspecialties.com/

    I use a Sam1 wad in a 2.75" Federal Gold Medal empty, Steel #2 shot, using IMR 800X or Alliant Steel powder, and produce velocities of up to 1850 fps. It takes a lot of time, but you really can see a difference on a duck.
     
  11. Hansli

    Hansli Member

    Joined:
    Nov 17, 2007
    Messages:
    95
    Location:
    Centex
    I am loading 7/8 oz. target loads for 2.57/box with shot, Promo, and Fiocchi 209's that I bought in bulk 3 years ago when I saw the commodities market begin to climb. Of course this is lower than can be done today but if you buy in bulk a box can still be had for 3.75 which is for a custom load vs. punishing promos @ $5.50. I definitely think it's worth it if you play it right.
     
  12. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,477
    Location:
    Happy Valley, UT
    Wow.
     
  13. 45auto

    45auto Member

    Joined:
    Dec 30, 2002
    Messages:
    1,241
    Also, depends on how much you shoot. 500 shells or 10,000+?


    You can save if you can buy bulk components "cheap". There seems to be a wide variations on those costs depending on what's in your area.
     
  14. DesertPunisher425

    DesertPunisher425 Member

    Joined:
    Dec 30, 2008
    Messages:
    14
    Digging up a little bit of an old thread here... but I'm in the same boat. Someone mentioned buying components on the cheap in bulk; Where can I find some of this stuff? Shot around here is ridiculously priced; so much so that I've forgone getting into shot shell reloading. I have thousands of empty hulls; mostly federal, estate and those likes (cheap stuff). It's time I either start reloading them, or get rid of them!
     
  15. ants

    ants Member

    Joined:
    Nov 24, 2007
    Messages:
    3,503
    Since this thread started 5 months ago, bagged shot came down to the mid $30 range at Sportsman's Warehouse. It's even cheaper to reload shotshells now.

    Where do you get the REAL deals on shot? You and your club members buy 3 pallets (pallets or 55 gal drums) of shot direct from the manufacturer. Even reclaimed shot is scarce these days, so bulk is the biggest avenue for savings.
     
  16. NCsmitty

    NCsmitty Member

    Joined:
    Jun 29, 2008
    Messages:
    5,325
    Location:
    North Carolina
    The only real savings are the 410 and 28 with their very high retail prices. I load 2 1/2" 410 for less than $3 a box, not counting the hulls.

    NCsmitty
     
  17. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    DesertPunisher - try your local shotgun club - if they don't sell it, see if they have reclaimed shot - works great for practice....OR find a group of people and go in on a LARGE load; split among many folks, the freight costs are low.

    Most folks I know don't reload the Estate hulls - I have for one or two times - usually need to follow Federal recipes and their wads
     
Thread Status:
Not open for further replies.

Share This Page