Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

bauer .25acp aka the baby browning copy ...need help

Discussion in 'Handguns: Autoloaders' started by yongxingfreesty, Dec 27, 2006.

Thread Status:
Not open for further replies.
  1. yongxingfreesty

    yongxingfreesty Member

    Joined:
    Oct 3, 2005
    Messages:
    1,396
    well, i had this gun for a while and the trigger is always falling out of place.
    is this an easy fix? what is wrong with it? the gun shoots fine, ejects fine and is pretty accurate.

    i just want to know if it is worth buying back from a friend of mine and fixing it.

    Thanks!
     
  2. yongxingfreesty

    yongxingfreesty Member

    Joined:
    Oct 3, 2005
    Messages:
    1,396
  3. Old Fuff

    Old Fuff Member

    Joined:
    Dec 24, 2002
    Messages:
    23,908
    Location:
    Arizona
    No, the trigger shouldn't fall out. It is supposed to be held in place by a pin on the trigger bar, on the right side of the frame. The bar is held in place by the right grip. If the groove in the grip is too deep the bar might "walk out" enough so that the trigger was released. Put a heavy strip of tape in the slot and see if that cures the problem. If so, remove the tape and make a more permanent correction, or buy a new set of grips.
     
Thread Status:
Not open for further replies.

Share This Page