Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Beautiful nickel plated CZ 83.

Discussion in 'Handguns: Autoloaders' started by emilianoksa, May 9, 2009.

Thread Status:
Not open for further replies.
  1. emilianoksa

    emilianoksa Member

    Joined:
    Apr 24, 2007
    Messages:
    396
    Location:
    Lima, Peru
    They have one or two in a local gunshop.

    First time I've ever seen the nickel one, and I have been tempted to buy it.

    What stops me is the worry about how well that nickel plating will stand up to cleaning chemicals. I read somewhere that if you get a small crack near the end of the slide, stuff can get in and rot it from the inside.

    Am I being unnecessarily nervous about this?

    After all, nickel plated guns have always had a popular following.
     
  2. outerlimit

    outerlimit Member

    Joined:
    Mar 18, 2007
    Messages:
    1,375
    I find they go well with my pimp hat and pimp boots.
    It's a durable finish, but I prefer hard chrome.
     
  3. bannockburn

    bannockburn Member

    Joined:
    Apr 24, 2007
    Messages:
    13,159
    emilianoksa

    Over the years, I've avoided using any sort of copper solvent (like Hoppes No. 9), on nickel plated guns. Many guns are first plated with copper as nickel plate may not bond with the steel surface. As such using a copper solvent may cause the base coating of copper to loosen, taking the top plating of nickel with it. To polish the nickel plate I use Flitz Metal Polish and Fiberglass Cleaner.
     
  4. emilianoksa

    emilianoksa Member

    Joined:
    Apr 24, 2007
    Messages:
    396
    Location:
    Lima, Peru
    Thanks for the advice.
     
  5. rslpilot

    rslpilot Member

    Joined:
    May 7, 2009
    Messages:
    26
    I've got a nickle plated cz 83, cool little gun. So far so good with the finish, but I try to keep the harsh bore cleaners inside the barrel only. I lightly mist the outside of the gun with CLP to help protect the finish prior to cleaning the bore, and quickly wipe off any spills. I, then, clean the gun top to bottom w/ CLP. There are some internal wear areas where the nickle is ever so slightly peeling--not sure if this is normal or not.
     
  6. CPshooter

    CPshooter Member

    Joined:
    Nov 6, 2006
    Messages:
    1,420
    I've never been a fan of nickel-plating. Hard chrome is much better IMHO. Robar's NP3 is an excellent alternative if you like the matte stainless look.

    I'd buy a black gun and have it re-finished in HC before I buy a nickel-plated gun. Nothing is wrong with nickel if you take good care of it, but I'd rather not worry about it and avoid it in the first place.
     
  7. krs

    krs Member

    Joined:
    Jan 16, 2006
    Messages:
    2,588
    Location:
    Tall Trees
    bannockburn has given a good concise description of the possible problem and of the best preventative practice.

    Nickel plating itself is a very durable finish. There are examples of well preserved nickel jobs that still look near new after more than 100 years of presence.

    I used the word 'presence' instead of the word 'usage' deliberately.

    If you like a silver color hard chroming is the toughest finish available. But if you like a BEAUTIFUL silver finish then nickel is your only choice. Nothing else has such lasting polish, and there's a difficult to define 'warmth' to a nickeled gun that no SS or HC can bring. Electroless nickel can be even more beautiful although seldom as high gloss.
     
  8. EAJ

    EAJ Member

    Joined:
    Apr 22, 2008
    Messages:
    485
    I have two CZ 83's; nickel and blue. I use BF CLP and BF Powder Blast on mine. Both work well on the frame/barrel however BF Powder Blast will mess up the OE plastic grips. I always remove the grips when cleaning the pistols.

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page