Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Beretta Model 101 - Help!

Discussion in 'Gunsmithing and Repairs' started by Limo, Aug 16, 2014.

Thread Status:
Not open for further replies.
  1. Limo

    Limo Member

    Joined:
    Aug 16, 2014
    Messages:
    2
    I have a model 101 that I took target shooting a while back. Got home and to my dismay found that the rear sight was lost. The local gunsmith told me he could manufacture one if he had the specs. but I don't think they are available anymore. Also, I found a parts dealer online (can't remember their name) that I ordered. But when it arrived, it was not the same part. I have thought about buying a used one and having the gunsmith duplicate it and then reselling. Any suggestions would be greatly appreciated.
    Limo
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    You need to find a real gunsmith.

    Any one deserving the name could measure the pin location & screw hole location on the base.
    And make a taller sight to fit it, and then cut it down to the right height to zero it.

    It wouldn't be cheap.
    But any 'good gunsmith' should be able to do it.

    A 'parts replacer gunsmith' couldn't.

    rc
     
  3. bannockburn

    bannockburn Member

    Joined:
    Apr 24, 2007
    Messages:
    13,201
    Try Bob's Gun Parts (gun-parts.com), to see if they have a rear sight assembly. I have found some much needed Beretta parts with them.
     
  4. Limo

    Limo Member

    Joined:
    Aug 16, 2014
    Messages:
    2
    Thanks guys
     
Thread Status:
Not open for further replies.

Share This Page