Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Berrys 124grain plated rn

Discussion in 'Handloading and Reloading' started by lttuna, Dec 7, 2012.

Thread Status:
Not open for further replies.
  1. lttuna

    lttuna Member

    Joined:
    Feb 24, 2012
    Messages:
    15
    In lee's reloading manual 2nd edition pg 509 they show data for 124 grain copper plated. Is the the data I would use for Berrys 9mm 124gr round nose
     
  2. armoredman

    armoredman Member

    Joined:
    Nov 19, 2003
    Messages:
    16,213
    Location:
    proud to be in AZ
    Yes. :) Berry's states their bullets can be used up to the mid range of jacketed data.
     
  3. lttuna

    lttuna Member

    Joined:
    Feb 24, 2012
    Messages:
    15
    Thanks , will try it out
     
  4. the count

    the count Member

    Joined:
    Dec 25, 2010
    Messages:
    777
    Location:
    Anywhere, USA
    There is a ton of nit picking and hair splitting going on with reloading. Feel free to indulge into it but if you want to keep your life simple just use 4.2 grains of bullseye with any type of 9mm bullet from 115-124 grains. Thats a stout, but not hot, load that will cycle any semi auto.
     
  5. rfwobbly

    rfwobbly Member

    Joined:
    Nov 14, 2008
    Messages:
    3,845
    Location:
    Cornelia, GA
    If you like those, then try the Berry 124gr Hollow Base RN next time for a little extra accuracy.

    [​IMG]
     
  6. armoredman

    armoredman Member

    Joined:
    Nov 19, 2003
    Messages:
    16,213
    Location:
    proud to be in AZ
    I have the 115 grain Berry's HBRN-T, and they work wonders. :)

    I also don't have any Bullseye - nobody within 70 miles of me carries powder or primers, so I use what I've used for years - Accurate Arms, ordered in. If there was somebody close who carried it, and I could pick up a pound on a whim, I'd give it a "shot.";)
     
Thread Status:
Not open for further replies.

Share This Page