Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bisley hammer on Beretta Stampede Marshal?

Discussion in 'Handguns: Revolvers' started by MikeJackmin, May 10, 2007.

Thread Status:
Not open for further replies.
  1. MikeJackmin

    MikeJackmin Member

    Joined:
    Feb 24, 2005
    Messages:
    1,516
    Beretta makes a Bisley version of the Stampede revolver, but it seems to use a different frame. Anybody know if the hammer from that gun would fit a Stampede Marshal? You gotta admit, that would be a nice-looking combination:


    [​IMG]
     
  2. Jim March

    Jim March Member

    Joined:
    Dec 24, 2002
    Messages:
    8,732
    Location:
    SF Bay Area
    The GRIP frame is different but it's very unlikely the Bisley Stampede primary frame (also known as the "cylinder frame") is different than either the regular Stampede or the Marshal.

    Certainly the Colt Bisley primary frame was the same as the SAA...

    As to your question, yeah, should fit just fine. The problem though is going to be scoring the parts. At a minimum they'll likely be shipping out of Italy and worst case they'll consider that a "gunsmith install only" part for liability reasons.

    Ruger hammers of all types can be had at Brownell's, which is where the SBH hammer on my New Vaq came from.
     
  3. MikeJackmin

    MikeJackmin Member

    Joined:
    Feb 24, 2005
    Messages:
    1,516
    Here's why I was concerned about the frame:

    "Instead of taking the easy road and 'dressing up' our Stampede as a Bisley, we have built this revolver from the ground up around a true Bisley frame – which is somewhat taller than that on its standard single-action cousin."

    http://www.berettausa.com/product/spotlight/spotlight_replicas_main.htm

    I assume they are talking about the cylinder frame, but I don't really know...
     
  4. MikeJackmin

    MikeJackmin Member

    Joined:
    Feb 24, 2005
    Messages:
    1,516
    Beretta customer support chimes in:

    "The Marshal is not available with the a blued Bisley hammer. The bisley hammer is not available for individual sale. Thank you for contacting Beretta Customer Support."

    Maybe I'll buy a Ruger instead.
     
  5. Jim March

    Jim March Member

    Joined:
    Dec 24, 2002
    Messages:
    8,732
    Location:
    SF Bay Area
    I see. Very interesting, and another reason to go Ruger :(.
     
Thread Status:
Not open for further replies.

Share This Page