Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Blackhawk grip frames

Discussion in 'Handguns: Revolvers' started by Quoheleth, Mar 16, 2010.

Thread Status:
Not open for further replies.
  1. Quoheleth

    Quoheleth Member

    Joined:
    Mar 7, 2007
    Messages:
    3,179
    Location:
    The Land of Bowie, Crockett, Travis & Houston
    I'm curious - can a Blackhawk's XRED grip frame be interchanged with a Bisley-style gripframe? Does anyone make aftermarket parts for the interchange? Can an average guy do this at home or is it more complicated than I'm thinking it is? I know the trigger and hammer wouldn't be "right" - but it would still work, right?

    Q
     
  2. madcratebuilder

    madcratebuilder Member

    Joined:
    Jul 15, 2007
    Messages:
    5,020
    Location:
    Northern Orygun
    A Bisley grip frame that has already been fit to a frame may or may not fit another frame as far as a perfect match at the edges. If you buy a unfinished grip frame it well be slightly over size and you well need to file to fit, or as I like to say "hammer to fit, paint to hide" It helps if you have some experience with metal working, just take your time and it well come out looking great.

    This is a 50th ann .357 with a brass birdshead and Bislet hammer. Brass is very easy to work and no special finish is needed.

    [​IMG]
     
  3. nulfisin

    nulfisin Member

    Joined:
    Jun 9, 2009
    Messages:
    411
    I priced those grips some time ago (about $200) and opted against them. That's roughly half the price of the gun. The grips can be made to fit well, but they don't just slip right on. If you aren't comfortable with some small but important screws and adjustments, I'd let a gunsmith do it.
     
Thread Status:
Not open for further replies.

Share This Page