Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Blackpowder in a smokeless cartridge?

Discussion in 'Handloading and Reloading' started by cabbithunt, Nov 16, 2008.

Thread Status:
Not open for further replies.
  1. cabbithunt

    cabbithunt Member

    Joined:
    Apr 6, 2008
    Messages:
    2
    I was wondering if there is any available data or if anyone has tried blackpowder in a smokeless cartridge. Would it be possible to safely work up a blackpowder load in either 38 special or 357 mag to fire in my stainless steel Ruger GP100? I usually use Bullseye powder but I can't help but wonder what blackpowder would be like.

    And if it is safe, any negatives or things I should know?

    I've always enjoyed firing blackpowder guns. There's just something about that cloud of gunsmoke. I figure the only thing better than firing a smoke pole would be firing six rounds of it.

    What do you think? Is this a good way to hurt myself/damage my gun; or something I should try?

    Thanks!

    Cabbithunt
     
  2. Steve C

    Steve C Member

    Joined:
    Jan 5, 2006
    Messages:
    4,705
  3. BHP FAN

    BHP FAN Member

    Joined:
    Sep 23, 2008
    Messages:
    5,810
    Location:
    Northern California
    That's the only way I load .45 Colt,any more.I use Goex,or if I want magnum performance,Triple Seven.
     
  4. Jeff F

    Jeff F Member

    Joined:
    Mar 9, 2006
    Messages:
    1,507
    Location:
    Silver Springs NV
    The .38 special was originally a black powder cartridge. like others have said all black powder loaded cartridges need to have their powder charge lightly compressed when the bullet is seated.
     
  5. Bullseye1100

    Bullseye1100 Member

    Joined:
    Nov 8, 2008
    Messages:
    9
    Location:
    MD
    I've loaded black powder for my .44 mag Ruger Vaqueros and it's pretty cool. You get a lot of smoke, a big bang, some nice flames, and that wonderful burnt powder smell. I've done a lot of Cowboy Action Shooting and one of the guys there told me how to do it. The trick is to put the black powder in a bowl and after you have primed your brass, dip the case in the powder and make sure it's pretty full. You DO NOT want any air space between the powder and the bullet. When you seat the bullet, you actually want to hear the powder crunch a bit. If you try this and find the load is a little heavier than you're looking for, you can use less powder and then fill the rest of the case with uncooked instant grits. I know it sounds strange, but that allows you to use less powder and still not have any airspace.
     
  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Beware that you will still need to dissemble and clean your stainless Ruger with hot soap & water when you get done.

    Black powder fouling will rust the chrome of a Harley muffler given enough time!

    rcmodel
     
  7. Smilin Jack

    Smilin Jack Member

    Joined:
    Nov 8, 2006
    Messages:
    65
    Location:
    western Oregon
    black powder in 30-30

    My hunting partner shoots Goex 3fff in his 30-30 Win with great luck, using 150gr SWC cast and lubed slugs. Pretty sure he shoots 30 grains of 3fff.

    Smilin Jack
    Western Oregon
     
Thread Status:
Not open for further replies.

Share This Page