Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BlackThorne AR Kits?

Discussion in 'Rifle Country' started by Dionysusigma, Aug 19, 2007.

Thread Status:
Not open for further replies.
  1. Dionysusigma

    Dionysusigma Member

    Joined:
    Mar 27, 2003
    Messages:
    3,671
    Location:
    Okay City
    http://www.blackthorneproducts.com/

    Has anybody ever heard of them, or have any experience with them? As usual, I'm on a tight budget (and for those wondering, I kept both the AR lower and the Mauser), and their kits are the least expensive I've seen.
     
  2. loadedround

    loadedround Member

    Joined:
    Feb 18, 2006
    Messages:
    3,353
    Location:
    Valley Forge, Pa
    I too asked the same question 3 or 4 months ago when I wanted to purchase a new AR. Every comment I received back reccommened that I stay away from this company because of their extremly poor quality control and the fact this company has had several name changes recently. Since I had no personal expeience with this company I shied away from them and ended up buying a reasonably priced Colt Carbine on Gunbroker. JMHO
     
    Last edited: Aug 21, 2007
  3. kentucky_smith

    kentucky_smith Member

    Joined:
    Oct 6, 2005
    Messages:
    1,686
    Hesse/Vulcan


    RUN AWAY!!!
     
  4. MudPuppy

    MudPuppy Member

    Joined:
    Jan 11, 2005
    Messages:
    1,529
    Location:
    UK and Texas
    Without researching I got an AR kit (and a couple of AK kits).

    1) Right after I ordered, the website put up a notice saying they were running behind and to add a few days for shipping on any orders. So, took a little longer, no big deal.
    2) I ordered a "kit" but the upper was assembled. Score.
    3) I put it together on a DPMS lower that already had a RRA fcg installed. Whoa, lot of gap there between the upper and lower. Slapped it on a olympic lower just to compare. Did a "function check" and all seemed well. Hmm.
    4) Took it to the range and had nightmare problems, rounds would fail to feed (strip off the mag, but hit low going in) and when it did load, fired off a little 4 round burst...scared the crap out of me (mainly fear of my government, but i'll refrain from L&P'ing. :) )
    5) Went out the next weekend and swapped uppers and lowers and narrowed it down to the upper.
    6) Called (even though it was weeks beyond their allowed inspection period--but I don't get to the range often, I live in hippiville texas and...oops, L&P'ing again. Dangit!) and they were nice and gave me an RA.
    7) Sent it in. It got lost. I called. Called the post office. Worried and fretted. It got found and I got a new one in.
    8) Tried to put it on the olympic lower. Guh, wouldn't fit--rear pin wouldn't go in. Well, the olympic has always been finicky with magazines (mag well too tight) so I thought I'd try the actual dpms it was intended for. Woot, it fits. Haven't gotten to the range yet to try it out.

    On one hand the ordeal of getting something that didn't work and needing to be sent back was less than pleasant, I do weigh a lot on how a company responds when there is a problem.

    I'll order from them again, but maybe not AR stuff. Definitely the AK stuff--those were in as new condition.
     
  5. jerkface11

    jerkface11 Member

    Joined:
    Oct 27, 2005
    Messages:
    5,499
    Location:
    Arkansas
    If it's Hesse/Vulcan


    RUN AWAY!!! RUN AWAY RIGHT NOW AND DO NOT LOOK BACK!!
     
  6. jpwilly

    jpwilly Member

    Joined:
    Aug 10, 2007
    Messages:
    3,892
    Location:
    Phoenix AZ
    I've gotten two DMPS rifles from Coleman Tyler's online store. They have great customer service and really good prices on kits or completed rifles. My DPMS rifles fit and funtion perfectly. The Varmint Bull Barrel upper shoots 3/4" groups regularly and 1/2" and under groups when the stars align. My M4gery is accurate too but I use it to shoot cheap wolf plinking ammo and lots of it!
     
  7. PTK

    PTK Member

    Joined:
    Mar 25, 2007
    Messages:
    3,712
    Location:
    Montana
    I purchase from J&T Distributing and Model 1 Sales. They're both fantastic companies to deal with, but my preference is J&T due to slightly better customer service.
     
  8. Dionysusigma

    Dionysusigma Member

    Joined:
    Mar 27, 2003
    Messages:
    3,671
    Location:
    Okay City
    :uhoh:

    Alrighty. Guess I'll go with the Del-Ton midlength A3 I was looking at.

    Thanks, THR! :)
     
  9. Coronach

    Coronach Moderator Emeritus

    Joined:
    Dec 20, 2002
    Messages:
    11,109
    I don't know if Blackthorne = Hesse, but if they do, the previous advice (RUN AWAY!) is valid.

    Mike
     
  10. nalioth

    nalioth Member

    Joined:
    Jul 9, 2007
    Messages:
    5,841
    Location:
    Houston, Texas
    Guys, these shady vendors do this on purpose. They change their company names yearly so you can't keep up with them and so n00bs don't 'click' on "hesse", "joeken" "FGW" or other. Don't be fooled by this and send them money.
     
Thread Status:
Not open for further replies.

Share This Page