Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Blued vs. Stainless revolver values

Discussion in 'Handguns: Revolvers' started by 68lemans462, Dec 22, 2012.

Thread Status:
Not open for further replies.
  1. 68lemans462

    68lemans462 Member

    Joined:
    Dec 23, 2011
    Messages:
    143
    Location:
    Denver, CO
    Wondering if you guys can help shed some light on a question I have. In general terms, are blued guns worth more in terms of collectibility than stainless, or other types of non-blued finishes? Which type is the most desirable, or does it just depend on the particular gun? Thanks and MERRY CHRISTMAS guys!
     
  2. MIL-DOT

    MIL-DOT member

    Joined:
    Jun 20, 2006
    Messages:
    3,110
    Location:
    Georgia,C.S.A.
    While there are valuable stainless guns around,there are more valuable/collectable blued guns out there because older guns were blued carbon steel, and not made of stainless. Bluing can be much prettier and lustrous, and is more difficult to maintain in pristine condition, so it is of greater value to many. Stainless is seen as being utilitarian and modern, so is generally a bit less desirable to the collector types, from what I understand.
     
  3. highpower

    highpower Member

    Joined:
    Aug 5, 2011
    Messages:
    779
    Location:
    Reno NV
    What MIL-DOT said. Although, there are certain stainless guns that have become valuable in their own right. The S&W Model 66, particularly the no dash guns, comes to mind.
     
  4. 68lemans462

    68lemans462 Member

    Joined:
    Dec 23, 2011
    Messages:
    143
    Location:
    Denver, CO
    Is it safe to assume that nickel=stainless in terms of collectibility, relative to this discussion? Thanks.
     
  5. Iggy

    Iggy Member

    Joined:
    Dec 24, 2002
    Messages:
    3,011
    Location:
    Wyoming
    A nickel gun in good condition will draw a small premium over blue in most cases.
     
  6. PabloJ

    PabloJ Member

    Joined:
    Oct 17, 2010
    Messages:
    4,999
    Given choice when buying used I will take "stain resistant" EVERY time, but unlike some I do not count number of pins in the frame. I do not mind non-pinned barrels, locks, MIM parts either. I prefer S&Ws because I can fix them myself with spare parts which are readily available.
     
  7. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    14,271
    Location:
    West Tennessee
    It depends on what it is specifically but blued guns tend to carry higher values. With nickel carrying a premium over that. Stainless guns, for the most part, are more common and pedestrian but there are always exceptions. As always, condition is a big factor but something like a well worn Colt New Service Target will almost always be worth more than a minty late model 686.
     
    Last edited: Dec 22, 2012
  8. richkratz

    richkratz Member

    Joined:
    Feb 3, 2010
    Messages:
    45
    Location:
    SE Pennsylvania
    Many factors involved. Is a mid-80's model 19 with fair bluing that is not P&R worth more than a stainless model 66 no-dash P&R in good condition? I would say no. Date of manufacture, condition of finish, P&R, grip condition all play a part. To blanket statement of bluing is worth more than stainless, I disagree.
     
  9. CraigC
    • Contributing Member

    CraigC Member

    Joined:
    Jan 27, 2006
    Messages:
    14,271
    Location:
    West Tennessee
    Obviously a blued gun in poor condition will typically be worth less than a minty stainless gun. Obviously some stainless guns will be worth more than some blued guns. I don't think anybody made such a blanket statement.
     
  10. Hondo 60

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,256
    Location:
    Manitowoc, WI
    Value, just like beauty, is in the eye of the beholder.

    But in general, I agree with MIL-DOT in post #2.
     
  11. richkratz

    richkratz Member

    Joined:
    Feb 3, 2010
    Messages:
    45
    Location:
    SE Pennsylvania
    Looking on gunbroker, prices asked for mint 19's and 66's are just about equal, no bids, but equal asking prices. Now, both models that do have bids are about the same when the 19 is blued vs nickel, which will draw a premium.
    My point was all things being equal (model year, P&R, finish condition, function condition, grip condition etc) I don't see a premium for blued over stainless. Same can be said for other models like my 64 in stainless vs the model 10 in blue...no appreciable difference in selling price at same condition. I have blued, nickel and stainless revolvers, so I have all dogs in the fight.
     
  12. GP100man

    GP100man Member

    Joined:
    Mar 16, 2007
    Messages:
    1,749
    Location:
    Tabor City, NC.
    Try & keep all the nicks/scratches /blemishes off a hi polished SS gun .

    It can`t be done , that`s why 99% of SS guns are a brushed/satin finish .

    & can be touched up with a brush/pad that`ll match the grain !
     
  13. spearpoint

    spearpoint Member

    Joined:
    Dec 27, 2010
    Messages:
    23
    "In general terms", and especially "in terms of collectibility", it is utterly irrelevant, unless you are comparing otherwise-identical firearms. It's like asking whether certain percentages of rag content are more desirable than others in philately...
     
    Last edited: Dec 23, 2012
  14. ColtPythonElite

    ColtPythonElite Member

    Joined:
    Jan 8, 2011
    Messages:
    7,356
    I have factory bright King Cobra shooters that still look like new.
     
  15. ColtPythonElite

    ColtPythonElite Member

    Joined:
    Jan 8, 2011
    Messages:
    7,356
    FWIW, right now stainless Pythons are commanding a premium over blued guns.
     
Thread Status:
Not open for further replies.

Share This Page