Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Building My Reloading Bench

Discussion in 'Handloading and Reloading' started by Lerk, Oct 4, 2012.

Thread Status:
Not open for further replies.
  1. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    Well after putting it off for so long I got impulsive tonight and pick up material to build my reloading bench to my my Hornady LNL AP, Lee Classic, Pacific DL-266 and put my other goodies in.

    Got 2 36" base cabinets (2 drawers, 2 doors) and a 72" counter top to hook them together. Gotta sand them up and stain them, assemble everything and mount the presses.

    And a little update of tonight's progress. I plan to build this in a way that it can be broken down for transport. So to start out I flipped one of the cabinets on the side:

    IMAG0330.jpg

    Next I had to cut some 1/2" plywood to fill in the space between the two cabinets at the back:

    IMAG0331.jpg

    Next threw the other one up there:

    IMAG0332.jpg

    Just another view:

    IMAG0335.jpg

    And wanted to reinforce the top cover so I cut a piece of 3/4" plywood to put underneath it:

    IMAG0337.jpg

    But sadly in my rush, I realized I have zero screws or bolts the right size to put any of this together. Tomorrow heading to town to pick up the hardware.
     
  2. Certaindeaf

    Certaindeaf member

    Joined:
    Jan 16, 2012
    Messages:
    5,170
    Location:
    Wet Oregon
    Doh! Looks like fun, man!
     
  3. lead slinger

    lead slinger Member

    Joined:
    Mar 19, 2011
    Messages:
    93
    Location:
    right near the beach
    looks good want to see it finished
     
  4. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    Got the top glued and screwed together now. Also got the top connecting bolts for the cabinets done as well. Working on the bottom ones right now and putting the studs on the top that will bolt to the cabinets.
     
  5. Doc Savage

    Doc Savage Member

    Joined:
    Jan 7, 2008
    Messages:
    121
    Location:
    Huntsville AL
    Looks just like the cabinets we got for the kitchen when we redid it last year. Looking good.

    Robert
     
  6. MachIVshooter

    MachIVshooter Member

    Joined:
    Aug 11, 2005
    Messages:
    14,467
    Location:
    Elbert County, CO
    I only mean to offer constructive input here, but I really can't imagine a reloading bench that you are unable to get your legs under. Sounds like a sore back to me.

    I personally prefer the storage up top. I just reinforced a freebie computer desk:

    101_1149.jpg
     
  7. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    I've found that it is more comfortable for me not to sit under my bench when reloading. I was previously reloading on a desk and sat under it, but never did because I had to hunch backwards to be able to run everything.

    Plus this bench will be higher and the presses will be on riser mounts, with a barstool it should be pretty comfy.
     
  8. mxjunky78

    mxjunky78 Member

    Joined:
    Oct 22, 2010
    Messages:
    103
    Location:
    Conroe, TX
    I see the pros and cons to both options. I personally prefer a legs under bench myself. But to each his own. Nice work Lerk.
     
  9. tallpaul

    tallpaul Member

    Joined:
    Oct 17, 2006
    Messages:
    793
    MachIVshooter....
    Like you can get your feet/legs under your bench hahahahaha looks like my open bottom ones... I have several benches set up and am starting to get back into the game and may change everything around a few times before I am all set...
     
  10. MachIVshooter

    MachIVshooter Member

    Joined:
    Aug 11, 2005
    Messages:
    14,467
    Location:
    Elbert County, CO
    About a foot under at my knees, which is all that's needed to comfortably operate the press.

    I've had to use cabinet tables before at freinds places, and found my knees sore from being mashed into the doors or drawers and my back burning after a few hours.
     
  11. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    Just another update, everything is assembled, I have dilled all the mounting holes for the presses. Hoping to get the sanding done yet tonight and to get a coat of stain on it before I head to bed.

    Too lazy to upload progress pictures, but I'll get them up soon.
     
  12. AJBarney

    AJBarney Member

    Joined:
    Aug 10, 2011
    Messages:
    29
    waiting on pics.....looking forward to seeing the good work :)
     
  13. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    And here are pictures of the progress. Been stained and the sealant is drying currently. Assembly in the morning.

    Bolt system connecting the two cabinets:

    IMAG0339.jpg

    This is the outside bolt block before the top has been screwed to it:

    IMAG0342.jpg

    Connecting the top:

    IMAG0343.jpg

    IMAG0345.jpg

    Another view of the bolt block after the top has been connected:

    IMAG0347.jpg

    And finally of the stained product:

    IMAG0351.jpg

    Sorry for the fuzzy pictures also, camera must of been a little dusty
     
  14. Pacsd

    Pacsd Member

    Joined:
    Nov 13, 2010
    Messages:
    413
    Have you given any thought of securing it to the wall and or the floor? Or, did I miss that reading all the posts?
     
  15. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    Sorry I never did specify, due to having to stay at my parents currently (due to some financial and medical issues) I am unable to fasten it directly to the wall or the floor. So I had to build it in such a way that I can dissassemble it easily but also have it sturdy enough to be free standing.

    One more picture also, the bottom of the top:

    IMAG0352.jpg
     
  16. Certaindeaf

    Certaindeaf member

    Joined:
    Jan 16, 2012
    Messages:
    5,170
    Location:
    Wet Oregon
    When that thing is loaded down it'll be just fine free-standing. Just make sure it doesn't rock.. shim it if necessary while it's unladen.
    Good work and I'm looking forward to seeing it finished.
     
  17. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    Seems I neglected to post up pictures of the final product, sorry about that. So here it is done and with the presses mounted. Had to do a little shimming, but it's solid as a rock now. I doubt it'll ever be clean, it's not even right now :rolleyes:

    IMG_0269.jpg

    IMG_0270.jpg

    IMG_0274.jpg

    IMG_0273-1.jpg

    IMG_0272.jpg

    From the left is a Lee Breech Lock Challenger single stage with my homemade mount, it's not very pretty, but it's very strong. Next is my Hornady LNL AP with Inline Fabrication Strongmount, roller handle, and also has the ceiling LED kit installed, which gives it a lot of light on the shellplate. Finally is the old girl, a Pacific DL-266 single stage shotshell reloader setup for 12ga. I had just gotten parts in from Hornday to replace both hoppers, some minor springs I needed, and also shot and powder bushings, so she is ready to roll. Probably going to do some test loads tonight with it.

    But it looks like I'll have to build another now, might be buying some more presses :p
     
    Last edited: Oct 31, 2012
  18. horsemen61

    horsemen61 Member

    Joined:
    Oct 20, 2011
    Messages:
    3,406
    looks good damn good great job
     
  19. Certaindeaf

    Certaindeaf member

    Joined:
    Jan 16, 2012
    Messages:
    5,170
    Location:
    Wet Oregon
    Nice setup!
     
  20. Kingcreek

    Kingcreek Member

    Joined:
    Dec 24, 2002
    Messages:
    2,821
    Location:
    at the center of my own little universe
    Looks nice.
    My first thought was how you gonna open the drawers with the presses mounted, assumed a front edge mount if you don't have open front space for legs. Then I see you went top mount and I wonder how it works for you ergonomicly? Maybe you are seated high enough that you are over it more than in front of it?
    Anyway, nice job. I often see cabinets discounted as scratch and dent or discontinued etc, sometimes very cheap. I also see older used cabinets from remodels from time to time that are better made than new ones. I think a kitchen cabinet contractor would be a good source of free ones if a person wasn't too picky.
     
  21. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    Height wise it works out great either standing at it or with a bar stool, actually very surprised that both positions ended up feeling great.

    And yea you're correct, you can find some very inexpensive scratch and dent stuff you if you look around. That counter top on mine is actually scratch and dent from Menards, only cost $20. It had a few small chips out of the back splash piece, so it worked out nice not wrecking a really nice one since I was going to drill it full of holes and probably get some damage from normal use. I do wish there was a local cabinet maker who I was involved with, could've probably gotten better cabinets for the same cost, but I was in a hurry so I made due. The drawers on these are pretty flimsy so I can't load them with much weight, and the bottom, back, and sides are all made out of particle board, so it didn't have the strength that I would've liked, but it'll still do the job great nonetheless.
     
  22. StretchNM

    StretchNM Member

    Joined:
    Dec 1, 2009
    Messages:
    256
    Location:
    Alamogordo, NM
    Looks good Lerk! I kindly like the way you mounted the presses on stands (homemade and well done) above the bench. I'm not sure how that would work out for me, but it looks interesting and worthy of a try.

    One minor point: That is NOT a Lee Classic you have there. That's the Breechlock Challenger. A good press, in my opinion, but not quite a Classic series.
     
  23. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    You are right Stretch, been calling it by the wrong name since I got it. That'll teach me for not researching things correctly. Better go change that description.
     
  24. capreppy

    capreppy Member

    Joined:
    Jan 27, 2011
    Messages:
    619
    Location:
    Fort Worth, TX (Saginaw)
    Why the wood blocks under the inline stand?

    Looks really nice. I am currently using my old desk and need a better bench. This has given me some ideas.
     
  25. Lerk

    Lerk Member

    Joined:
    Jan 17, 2012
    Messages:
    255
    Location:
    MN
    I ended up having to use the wooden blocks under the LNL storngmount in order to mount it that far away from the end. Without them, for some reason the threads on the handle would just barely touch the counter surface, they might have just been a tad too long. I figured it was better to give it more clearance and it also makes it a bit more comfortable to operate at that height.
     
Thread Status:
Not open for further replies.

Share This Page