Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Calibrated my Hornady Classic to my hornady AP

Discussion in 'Handloading and Reloading' started by Cherokee305, Mar 14, 2012.

Thread Status:
Not open for further replies.
  1. Cherokee305

    Cherokee305 Member

    Joined:
    Feb 18, 2012
    Messages:
    16
    Alright here it is. I made 4 small shims out of some aluminum I had measuring .15 inches. I stuck them under my lock n load socket and I used a bullet seating die to seat a bullet in each press without changing the die and got them within .002 of each other. One COAL ended up at 2.25 and the other at 2.248. Close enough in my book.

    [​IMG]
     
  2. cfullgraf

    cfullgraf Member

    Joined:
    Oct 19, 2010
    Messages:
    7,126
    Location:
    East TN
    Good idea! Thanks for sharing.
     
  3. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,191
    Location:
    Piney Woods of East Texas
Thread Status:
Not open for further replies.

Share This Page