Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

can this be?

Discussion in 'Handloading and Reloading' started by mnhntr, Oct 19, 2011.

Thread Status:
Not open for further replies.
  1. mnhntr

    mnhntr Member

    Joined:
    Jan 5, 2010
    Messages:
    1,135
    Location:
    MN
    I bought the second edition of modern reloading from Lee and the .260 rem info has a higher powder charge of H4350 under a 142gr jacketed bullet vs a 140gr jacketed bullet and the fps is higher with the heavier bullet.
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    All Lee's data is copied from the powder & bullet manufactures tested data.
    They have no ballistics lab themselves.

    So yes, if they copied the 140 data from one manufacture, and the 142 from another manufacture, they could very well be that much different.

    And you might also notice Lee's book doesn't even tell you what brand, shape, or construction of bullets they are even talking about!

    If you want current H4350 data, with known bullets, from the same source & test gun, go to Hodgdons website and get it.

    http://www.hodgdon.com/basic-manual-inquiry.html

    rc
     
  3. JohnM

    JohnM Member

    Joined:
    Jan 27, 2011
    Messages:
    1,640
    Location:
    Down there by the river
    Hmm, I didn't know that's how Lee got the data for their manual.
    I was going to pick up a copy of their latest one, but maybe not now.
     
  4. ranger335v

    ranger335v Member

    Joined:
    Dec 3, 2006
    Messages:
    3,797
    RC is correct that Lee compiles data from other reliable sources and that is why the cost of the book is minimal. That is NOT to say the information is incorrect or sloppy; it is not.

    The inconsistancy you've found is well within the expected norms. Fact is, no change we can possibly make to any book data has as much effect as the weapon it was fired in. Each manual maker, be it from powder, bullet makers or neither, lie. They all tell us exactly what they got for the listed charges IN THEIR GUNS, but each gun changes the results even if everything else is duplicated. Our guns are different from any of theirs so our results will also be different too. That's why ALL reloading manuals tell us to start low and slowly work up to book max unless excess pressure signs tell us to stop earlier; it seems a lot of people have trouble understanding that caution and just expect all book data to be spot on even tho it's clear that cannot possibly be!

    Bottom line, our reloading safety lies in our own hands, not a special book or data from any other source.
     
    Last edited: Oct 19, 2011
  5. JohnM

    JohnM Member

    Joined:
    Jan 27, 2011
    Messages:
    1,640
    Location:
    Down there by the river
    I like reloading manuals, but if Lee's data is from other sources it would be kind of redundant.
     
  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Well, yes & no.

    The last printing of the 2nd edition was copyrighted in 2003.

    So it contains data for Alliant powders with a lot of different bullets that the current ATK owner doesn't publish any longer.
    All they show you now is with Speer bullets, which is also owned by ATK.

    There are also some obscure older powders listed that are hard to find data for anywhere else now days.

    I must admit though that I have had a Lee 2nd edition manual for several years.
    And the only time I get it down and dust it off is when I try to answer questions like this about it.

    rc
     
  7. ranger335v

    ranger335v Member

    Joined:
    Dec 3, 2006
    Messages:
    3,797
    "I like reloading manuals, but if Lee's data is from other sources it would be kind of redundant. "

    It would be redundant only if you had all that info at hand; I doubt anyone does. Lee collects a LOT of very helpful loading data for their manuals. And that ignores all of the other very good info contained in their book.
     
  8. JohnM

    JohnM Member

    Joined:
    Jan 27, 2011
    Messages:
    1,640
    Location:
    Down there by the river
    :D:D
    From what you and RC are saying, I guess I'll splurge.
    I'm always on the lookout for obscure loads and different bullets.
    RC I still have the old first edition Lee manual :)
     
  9. MMCSRET

    MMCSRET Member

    Joined:
    Feb 18, 2008
    Messages:
    2,961
    Location:
    North Central Montana, across the Wide Missouri
    The Lee book also has a lot of other highly technical information in it; such as how to determine required cast bullet hardness required for a particular application. Also how to compute a powder charge and the density of a particular powder; and a lot of other interesting reading.
     
  10. mnhntr

    mnhntr Member

    Joined:
    Jan 5, 2010
    Messages:
    1,135
    Location:
    MN
    The book is very informative, and I like the variety of powder. The thing I don't like about the others is the limit of one or two bullet companies.
     
  11. Hondo 60

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,260
    Location:
    Manitowoc, WI
    That's kinda why I like the Loadbooks USA - One Caliber series.

    Yes, it's just copied from other's data, but then it's all in one cheap reloading manual.
    At $7 or so a piece, I have have 'em for almost all the calibers I reload.

    They don't print one for 7.62x25 Tokarev & I just bought a Ruger 44 mag.
    So on payday new 44 Spl & 44 mag manuals will be ordered.
     
  12. FROGO207

    FROGO207 Member

    Joined:
    Dec 7, 2008
    Messages:
    6,151
    Location:
    Mount Desert Island Maine
    I also like the way that Lee puts it in order using the velocity and can choose a load that I want to try whether fast or slow by going up or down the list. The correct way to use any loading manual is to use it as a GUIDE to choose a safe max load with a particular set of components. You do always have to start low and work up to max. This should be as second nature to you when reloading as adding a bullet to the round IMHO.:cool:
     
Thread Status:
Not open for further replies.

Share This Page