Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Can't get my PT-145 apart..Trick?

Discussion in 'Handguns: Autoloaders' started by old4x4, Jan 21, 2006.

  1. old4x4

    old4x4 Member

    Joined:
    Dec 3, 2005
    Messages:
    288
    Location:
    NH
    Seems straight forward. With the slide locked back and mag out, rotate & remove the dissassembly pin, let the slide go slowly forward-it should come off. Nope, it goes forward about 3/8" and stops. I would like to clean my NEW toy after a couple hundred rounds!!
    Nevermind-I forced it and it was just stuck to the frame....
     
  2. glove

    glove Member

    Joined:
    Sep 25, 2005
    Messages:
    536
    Location:
    Richfield, Ohio
    Hello
    Nice gun you have there. I have the PT140 Pro. The trick to removing the slide is after you remove the slide pin and you are moving the slide foward pull the trigger and it should come off.
    Dave Z
     
  3. Slinger

    Slinger Member

    Joined:
    Sep 16, 2005
    Messages:
    238
    Ditto what "glove" said.
    When you go to reassemble it be sure to put the flat side of the pin under the spring then rotate it as you push it through the frame. This will save you some :banghead: .
     

Share This Page