Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cast Performance LBT Heat Treated Solids Load Data

Discussion in 'Handloading and Reloading' started by jbovee, Mar 15, 2008.

Thread Status:
Not open for further replies.
  1. jbovee

    jbovee Member

    Joined:
    Jan 10, 2008
    Messages:
    5
    I am looking for load data for the following Cast Performance LBT gas checked bullets:

    .358" 180 gr. WFNGC (to be used in a 4" Ruger Security-Six)
    .410" 250 gr. WFNGC (to be used in a 6.5" Ruger Blackhawk)

    I prefer Alliant powders and particularly like 2400 and Blue Dot. Any help would be appreciated.
     
  2. MMCSRET

    MMCSRET Member

    Joined:
    Feb 18, 2008
    Messages:
    2,971
    Location:
    North Central Montana, across the Wide Missouri
    Cast Performance has a web sight with load data on it. They prefer h-110 or AA#9. Also , the Hodgdon 2008 edition has data.
     
  3. MMCSRET

    MMCSRET Member

    Joined:
    Feb 18, 2008
    Messages:
    2,971
    Location:
    North Central Montana, across the Wide Missouri
    My mistake, they have taken the load data section off the site. I do know that starting data is included in every box of bullets.
     
Thread Status:
Not open for further replies.

Share This Page