Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Coloring

Discussion in 'General Gun Discussions' started by 45Guy, Sep 21, 2008.

Thread Status:
Not open for further replies.
  1. 45Guy

    45Guy Member

    Joined:
    May 9, 2006
    Messages:
    378
    Location:
    Appleton, WI
    I read something on the Beretta forum about coloring in the stamping on pistols. I think it looks nice and I'm thinking about doing it with my XD, but I'm not sure if I can do this to slide without having color everywhere on the slide or if the slide will even take the color well.

    Does anyone have any experience with this?
     
  2. Philmccan

    Philmccan Member

    Joined:
    Dec 23, 2007
    Messages:
    28
    On the mosin forum I hear people using white out to bring out the date stamping and what not on there rifles. I keep wanting to do it to my rifles but have not got around to it.
     
  3. RonE

    RonE Member

    Joined:
    Aug 19, 2007
    Messages:
    696
    Location:
    Rockport, Texas
    Clean the area with acetone or some such solvent that is not unfriendly to the paint you plan on using. Fill the areas with the paint color you desire, let is get almost dry and wipe the over fills off so that the letters/numbers are the only places where paint can be seen. Do not overfill with paint. Once paint is completely dry, apply a light coat of gun oil or whatever you use as an atmospheric barrier on your firearms.

    Automobile wrecking yards use a special paint to mark used parts. This paint adhears to almost anything and comes in yellow, white and red if I recall. Tough stuff too.

    Please post some pictures when you complete the project.
     
  4. FireArmFan

    FireArmFan Member

    Joined:
    Oct 25, 2006
    Messages:
    492
    Location:
    Twin Cities, Minnesota
  5. 45Guy

    45Guy Member

    Joined:
    May 9, 2006
    Messages:
    378
    Location:
    Appleton, WI
    Thanks for the link Firearm Fan, that's what I'm wanting to do. I won't use paint, that way if I don't like it I can get it off.
     
  6. Speedo66

    Speedo66 Member

    Joined:
    May 31, 2008
    Messages:
    3,346
    One of the suppliers (Brownells?) used to carry a crayon type paint applier in gold or silver that worked well.

    You just rubbed it over the stamped portion, and wiped off the excess. Lasted quite a while.
     
  7. 230RN
    • Contributing Member

    230RN Marines raising the left-leaning Pisa tower.

    Joined:
    May 27, 2006
    Messages:
    6,632
    Location:
    Calirado
    I had my initials engraved on a Colt Commander slide and filled it with the gold stuff. Looked pretty sharp, yet was only conservatively blingy. "In good taste," in other words.

    In a year of use, the filled lettering did not seem to wear perceptibly.

    Always regretted selling that gun. Thirty-Eight Super chambering.
     
  8. RobNDenver

    RobNDenver Member

    Joined:
    Mar 23, 2008
    Messages:
    273
    Opposite Issue

    I have the opposite problem. A previous owner of my M1911 did this to the lettering on the slide and I want to remove it, since it is not supposed to be there.

    Any thoughts about how do to do this without affecting my gun's finish?
     
  9. Gator

    Gator Member

    Joined:
    Jul 23, 2003
    Messages:
    2,231
    Location:
    Stuck in Crook Co., IL
    Cheap, widely available, comes in different colors, and effective.

    [​IMG]
     
  10. jrfoxx

    jrfoxx Member

    Joined:
    Sep 23, 2004
    Messages:
    2,168
    Location:
    Evanston,WY
    I use the Laquer-Stik things seen here:
    http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=7778&title=LACQUER-STIK~

    Comes in a fair number of colors, is pretty easy to use, looks good, and can be taken off very easily without risk to the finish if you want. A google search for Laquer-Stik will turn up other places that sell it too, sometimes cheaper, and/or in more colors.

    I didnt have much luck trying crayons, grease pencils, etc, but other have, so you may need to try a couple things out and see what works for you. I have no artistic abilities or steady hands, so the Laquer-Stik worked best for me, as it was easy to clean up all the excess in places I didnt want it.

    Just my personal experiances though.
     
Thread Status:
Not open for further replies.

Share This Page