Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Colt Python Serial Number

Discussion in 'Handguns: Revolvers' started by davese, Aug 13, 2006.

Thread Status:
Not open for further replies.
  1. davese

    davese Member

    Joined:
    Aug 13, 2006
    Messages:
    4
    My Python's serial number is 04721E. Can anyone tell me when this was made? And what it may be worth? It is in mint condition and fired only 5 times.


    Thank you
    Dave
     
  2. slick6

    slick6 Member

    Joined:
    Nov 1, 2004
    Messages:
    915
    davese:

    1)Your Python was made in 1975. The serial number range for 1975, was from 01001E through 15000E.

    2)If in mint condition, I would estimate the value of your python to be between $950 and $1,300-depending upon what part of the Country that you are in? However, since colt is no longer producing any revolvers, Colt prices have been going through the roof! In view of this, you will be able to get whatever price that the market will bear, for the condition(And the completeness)of your Python!:what:
     
  3. BluesBear

    BluesBear member

    Joined:
    Jul 25, 2003
    Messages:
    7,672
    Location:
    The Great Pacific NorthWet
    [voice=Tom Leykis] Really? [/voice]

    Has anyone informed Colt about this?
    I don't think they got the memo.
     
  4. davese

    davese Member

    Joined:
    Aug 13, 2006
    Messages:
    4
    Thank you Slick. I am in the Tampa Bay area in Florida and I just bought this from a gun show yesterday. What do you mean by completeness? What is suppose to come with these?


    Thank you
     
  5. GUNKWAZY

    GUNKWAZY Member

    Joined:
    Nov 4, 2004
    Messages:
    976
    Location:
    AZ
    Your value would be not only based on location, but more so on the barrel length & finish of the gun.
    Is it 2.5, 4, or 6 inch. Is it Blue or Nickel. Does it have it's original woodgrain box ? Does it have it's original paperwork ?
    Are the grips factory wood target style grips, or in the case of the 2.5 inch barrel it would most likely have the factory wood service grips.
    All of this factors into the value of the gun.

    Also on a side note, Colt still today is producing revolvers, just NOT any double action wheels such as the Python, King Cobra or Anaconda.

    Jeff (GUNKWAZY)
     
  6. BluesBear

    BluesBear member

    Joined:
    Jul 25, 2003
    Messages:
    7,672
    Location:
    The Great Pacific NorthWet
    The King Cobra has been discontinued. ALong with a lot of other great revolvers.

    The Anaconda production is "suspended". :rolleyes:

    And the Python Elite is still available through the Custom Shop.
    Where, of course, all of the SAAs are produced also.

    Actually Colt's is looking more and more like a custom shop instead of a real gun company.
    Very few of it's guns are NOT made in the custom shop.

    I really hope they're going to do start producing their "improved" Double Action 1911.
    It would be nice to see Colt's pull it's corporate head out from between it's corporate buttocks and get back into "The Show".
     
  7. davese

    davese Member

    Joined:
    Aug 13, 2006
    Messages:
    4
    Hi KWAZY,

    Thanks for your input. It is a 6in, Blue finish (also there are no marks , scratches anywhere as far as i can see.) I do not have a box nor any paperwork and the grips are the factory wood.

    Is there places I can get a original box and paperwork?

    Thank you
     
  8. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    BluesBear:

    Colt no longer produces ANY double action revolvers.
    The Custom Shop is no longer building the Python AT ALL, and has stated that the Python will never be produced again.

    The Anaconda is not "suspended" it's discontinued.

    Here's a link to a report by a 1911 forum member who was given a guided tour of the Colt plant early this year.
    The production scheduling manager who's also a 1911 forum member gave the tour and discussed the status of Colt in general and DA revolvers in particular:

    http://members.aol.com/lmanwebdesign/ColtTour.html

    Since this, further details have made it clear that Colt is out of the DA revolver business, probably for good, and that due to the difficulties of producing the Python, it's gone forever.

    While I'm the first to "Never say never" about Colt, it's clear that they will be offering no DA revolvers, probably permanently.
     
  9. BluesBear

    BluesBear member

    Joined:
    Jul 25, 2003
    Messages:
    7,672
    Location:
    The Great Pacific NorthWet
    dfariswheel, I surely do not wish to ever debate anything Colt with you. You are THE resident expert. All I know is what I am told by a couple of people who work inside that building.

    The Colt website is still advertising Custom Shop Pythons.

    And the very article you linked says;
    And that pretty much agrees with things I have been told.
     
  10. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    All I know is, several people recently contacted Colt to ask about a Custom Gunshop assembled Python, and were told they no longer have any frames and cannot build them anymore.

    When asked why the Python was still listed as a Custom Shop item, they were told that Colt doesn't update their web site very often or spend much time doing so.

    Again, "Never say never" with Colt, but as for a DA revolver, I'd wouldn't hold my breath.
     
  11. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    Who knows mine?

    K98844.

    This one is a six-inch stainless that I got in 1999 for $500. Since I shoot all of my guns, it isn't NIB any more, but I do have the box. ;)
     
  12. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    K98844 was made in 1982.
    The numbers started that year at K75748, and ended at K99998.
     
  13. davese

    davese Member

    Joined:
    Aug 13, 2006
    Messages:
    4
    --------------------------------------------------------------------------------

    K98844.

    This one is a six-inch stainless that I got in 1999 for $500. Since I shoot all of my guns, it isn't NIB any more, but I do have the box.


    Did you want to sell the box?

    dfariswheel,

    Can I get a original box from that year somewhere? Do you know where I could look?

    Thanx
     
  14. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    The only place I know of to get the cardboard Colt boxes is on Ebay, and there it's luck of the draw.
    In other words, you just have to keep looking until hopefully, someone will auction a box of an appropriate type for your gun.

    By 1999, Colt was using the blue plastic box, so these are fairly easy to find.
    Here's one at Brownell's:
    http://www.brownells.com/aspx/NS/sc...=765&m=3&mn=Colt®&model=Revolver+Accessories+

    You can also buy these direct from Colt, I think.
     
  15. .357Mag

    .357Mag Member

    Joined:
    Aug 24, 2006
    Messages:
    2
    Central Europe asking for help! ;)

    Good afternoon!
    I am from Czech Republic from central Europe.
    I would ask you for help, please.

    I have Colt Python with serial number PY1959.

    Can you tell me year of production, please?

    Thank you very much for help. Sorry for my bad English.

    Roman
     
  16. dragongoddess

    dragongoddess member

    Joined:
    Aug 10, 2006
    Messages:
    557
    Location:
    Way Way out in West Texas
    So my decision to but an Anconda and King Cobra the other day was a correct decision as they are no longer in production. If so then I better go see if that fellow (non gun person)stillwants to sell that Python he took in trade for some coins.
     
  17. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    .357Mag"

    PY1959 was made after 1985.
    The publicly available Colt numbers only go up to 1985 and to get a production date for guns made after that, you have to call the Colt factory.

    Call during normal business hours and they will tell you the date made.
    Sorry, this may be tough to do from where you are, so you might try sending a letter with a self-addressed, stamped envelope, and they will likely send you the answer.
     
  18. .357Mag

    .357Mag Member

    Joined:
    Aug 24, 2006
    Messages:
    2
    TO: dfariswheel

    Thank you very much for your answer, it helps me!
    I'll try it and we will see... Roman
     
  19. Tradepost

    Tradepost Member

    Joined:
    May 23, 2011
    Messages:
    4
    Location:
    Ponderay, Idaho
    Date

    I was wondering if you can tell me what year my colt python is serial number T36561
     
  20. alienbogey

    alienbogey Member

    Joined:
    Dec 23, 2009
    Messages:
    270
  21. Guillermo

    Guillermo member

    Joined:
    Feb 20, 2008
    Messages:
    6,346
    Location:
    Austin, Texas
Thread Status:
Not open for further replies.

Share This Page