Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Commentaries on MID States cast bullets

Discussion in 'Handloading and Reloading' started by mamigor, Jul 16, 2011.

Thread Status:
Not open for further replies.
  1. mamigor

    mamigor Member

    Joined:
    Mar 19, 2011
    Messages:
    19
    I was looking up in the internet for some bullets and found these. They are quite cheap but I would like to obtain some information about their quality.
     
  2. Galil5.56

    Galil5.56 Member

    Joined:
    Dec 20, 2007
    Messages:
    1,094
    I like the bullets I bought, which were:

    9mm 115gr. Round Nose

    9mm 122gr. Flat Point

    9mm 125gr. Conical Point

    They are pretty much like any other bullets from a quality caster, the vast majority of which use the same Magma Engineering molds, using the same 92% lead, 6% Antimony, 2% tin alloy. I got mine just before the owner passed away some years ago, and in case you were not aware, you have to make sure the prices you see gotten from the internet are current.

    The 2005 page is still up, and shows prices from that time which also happened to include shipping:

    http://www.carrollsweb.com/gunshop/html/midstates_cast_bullets.html

    A similar looking page

    http://www.carrollsweb.com/gunshop/

    directs you to a new site that it seems they run the business from now:

    http://www.bulletsdirect.com/

    Good luck!
     
  3. eam3clm@att.net

    eam3clm@att.net Member

    Joined:
    Dec 2, 2010
    Messages:
    765
    If you are talking about http://www.bulletsdirect.com/ I have gotten bullets from them and his shop is not too far from my house so I can just pick up what I need. Matthew seems like good people and he gave me a tour of his set up and sent me home with some samples to try the last two times i bought from him. The story I got was that they were based in Kansas and moved their set up to Tennessee due to health issues.
     
  4. mamigor

    mamigor Member

    Joined:
    Mar 19, 2011
    Messages:
    19
    Thanks for your responses
     
Thread Status:
Not open for further replies.

Share This Page