Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Conversion Kit Question

Discussion in 'Handguns: Autoloaders' started by ultramag44, Sep 11, 2008.

Thread Status:
Not open for further replies.
  1. ultramag44

    ultramag44 Member

    Joined:
    Aug 15, 2008
    Messages:
    290
    Location:
    Lubbock, Texas
    Gentlemen:

    Will the EAA .22 LR conversion kit work on my Match .45 frame without sending the entire thing to EAA for "Fitting"?

    Thanks in advance, ultramag44
     
  2. kitsapcharly

    kitsapcharly Member

    Joined:
    Sep 8, 2008
    Messages:
    137
    Location:
    northwest
    Wish I knew what to tell you. I just traded in a POS fromTaurus last week for a 22/45 convertible EAA Witness and only got to test it out this last Tuesday. Bought extra mags for both calibers and a quick test with the 45 mags worked perfectly. Most shooting was done with the 22 top and with about 120 to 150 rounds there were around three or four FTF but nothing real bothersome for a new 22. A little slight fluff and buff will likely fix that and overall I'm real pleased.
    This is the regular full sized frame not the compact. Since you have a match model it probably has tight clearances so a guess is probably hand fitting. I do know the conversion seems nice when it's on but new to me.
    Best of luck.
     
Thread Status:
Not open for further replies.

Share This Page