Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CZ 40P Replacement Bushings/Spacers Now Available.

Discussion in 'Handguns: Autoloaders' started by 12 Volt Man, Jul 19, 2004.

Thread Status:
Not open for further replies.
  1. 12 Volt Man

    12 Volt Man Member

    Joined:
    Dec 30, 2002
    Messages:
    889
    Location:
    Utah
    B.I.L. and I finally got the time to machine replacement bushings/spacers for the CZ 40P. They turned out great. We tested one today, and they work great. They are made from Black Delrin. This material proved to be harder and more durable than the factory white plastic.

    Close-up.
    [​IMG]

    The one on the left is after 100 rounds of Winchester Value Pack ammo. The one on the right is a new one.
    [​IMG]

    Factory chewed up white bushing shown with a few that we made up.
    [​IMG]

    View installed in the slide. Shown with one of our guide rods :D . Note: The notched/chamferred side needs to go in the gun as shown.
    [​IMG]

    Top View
    [​IMG]

    Just threw this one in for fun.
    [​IMG]



    These can be purchased on our website. HERE The website contains info on sending a check or paying through paypal.

    Also please note. If you are using Wolff Springs in the gun. The inside diameter of the bushing/spacer needs to be made a little larger. Please let us know if you need this done.
     
  2. PCRCCW

    PCRCCW Member

    Joined:
    Dec 26, 2002
    Messages:
    2,860
    Location:
    The Ice Cream Capitol of the World!
    I was at the initial trial and error shoot last night and the bushings ran 100%. It improved the accuracy and reduced the recoil of the gun by at least 50000000000% :D
    Ok......it didnt but they still work very very well................
    You guys need to buy these things from 12 Volt, that way he can have money for a B-Day present for ME! LOL :rolleyes:
    Shoot well......
     
  3. powertoast

    powertoast Member

    Joined:
    Oct 11, 2003
    Messages:
    82
    Location:
    secret underground bunker
    I might have kept my 40P had I known of your replacements.

    When I stripped my new 40P and saw that stupid bushing, I called cz-usa to get some replacements. None were available, nor anticipated, so I traded the NIB gun the next day towards a Kahr PM9.

    best regards
     
Thread Status:
Not open for further replies.

Share This Page