CZ 75b, should I buy it?

Discussion in 'Handguns: Autoloaders' started by Blarelli, Dec 21, 2010.

Thread Status:
Not open for further replies.
  1. Blarelli

    Blarelli Member

    Joined:
    Sep 22, 2007
    Messages:
    469
    Location:
    Az
    I just ran across a very used cz 75b. It is old, has some odd aftermarket sites on it, the finish on the frame is turning red, the trigger on it is sweet, has the spur hammer, and it is only $320.

    I didn't look to see how old it was, but maybe one of you can help me with that. Its serial number was 80***.

    They wouldn't let me pull it apart at the gun shop so I don't know what the internals look like, but there was one thing on the frame that looked kind of odd to me. On the left side of the frame, in that opening just behind the safety there was a set screw that was actually coming all the way out on the same axis as the barrel. I haven't seen anything like that on the newer production models so I thought I should check and see if that is normal.

    Thanks for the help guys.
     
  2. bdixon

    bdixon Member

    Joined:
    Dec 3, 2007
    Messages:
    11
    It sounds like a really good deal to me. If I were you, I'd buy it.
     
  3. Blarelli

    Blarelli Member

    Joined:
    Sep 22, 2007
    Messages:
    469
    Location:
    Az
    Shut up Brad. I want the opinion of somebody that knows what they're talking about.
     
  4. JDGray

    JDGray Member

    Joined:
    Sep 16, 2005
    Messages:
    5,632
    Location:
    SW MI.
    I thought the spur hammers were only on the pre-Bs:confused:

    That hole is the hammer pivot pin hole, and it should have a vertical roll pin(loose) blocking the exit of the pivot pin. $320 isn't a seal, but fair price;)
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice