Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dehumidifier for a gun safe question HELP!!!!

Discussion in 'Shooting Gear and Storage' started by WhiteMikeCN, Mar 19, 2012.

Thread Status:
Not open for further replies.
  1. WhiteMikeCN

    WhiteMikeCN Member

    Joined:
    May 26, 2010
    Messages:
    65
    So I just recently moved and now have to put my gun safe in the garage rather than in the house due to the house being built off the ground and not on a slab. The safe is a Fort Knox safe and weighs about 3/4 of a ton. I live in Florida, so it is not only hot but, very, very humid. Here is my question:

    I can go with the standard heating rod type dehumidifier or the rechargable one that actually absorbs the moisture. Are there any other options? What would you choose and why?
     
  2. Shadow 7D

    Shadow 7D Member

    Joined:
    Nov 30, 2008
    Messages:
    7,005
    Location:
    Frozen North
    Get the silicone kitty litter
    put it in a cardboard box with the top open, when it starts looking opaque instead of crystalline, you can recharge it by putting the box in the oven at about 250 for an hour.

    OR you can pay 10 times as much for one that comes in a neat plastic container...
     
  3. ColtPythonElite

    ColtPythonElite Member

    Joined:
    Jan 8, 2011
    Messages:
    7,926
    Get an electric rod, install it and for the most part forget about it....Regardless of what type of system you use, I recommend buying a hygrometer to monitor the humidity in your safe. You can get a simple analog one for about 3 bucks or a nice digital one for less than 10 bucks.
     
  4. Coltdriver

    Coltdriver Member

    Joined:
    Dec 26, 2002
    Messages:
    2,202
    Location:
    Colorado
    When I was in North Carolina I used a 60 watt lightbulb and one container of desiccant. I never had any problems but the desiccant would have to be drained and dryed every10 days or so.
     
  5. alsaqr

    alsaqr Member

    Joined:
    Jul 5, 2007
    Messages:
    3,431
    Location:
    South Western, OK
    The Goldenrod works for me.
     
  6. SlowFuse

    SlowFuse Member

    Joined:
    Mar 31, 2011
    Messages:
    1,061
    Location:
    Heart of Dixie
    Another voter for the Goldenrod. I live in central Alabama, so I'd say my environment is similar to yours. Not a single problem with rust. I have some rifles that only come out for an annual cleaning/inspection. I would think that if you have firearms that come out for a oiling more often than that itd be even less of a problem.
     
  7. Blue Line

    Blue Line Member

    Joined:
    Mar 4, 2004
    Messages:
    547
    Location:
    Va
    I lived in S FL and SW FL and used the golden rod without a problem. Safe was on a slab in the garage, not a hint of rust. 1500 lbs is a huge safe, I need a new one!
     
  8. drcook

    drcook Member

    Joined:
    Jun 11, 2011
    Messages:
    282
    you do have to be careful with Goldenrods though. A friend had one in his safe and it removed enough moisture from the foreend wood of a Shiloh Sharps that the pewter foreend pulled away from the wood. They can dry wood stocks out too much.
     
  9. Shadow 7D

    Shadow 7D Member

    Joined:
    Nov 30, 2008
    Messages:
    7,005
    Location:
    Frozen North
    ANY dehumidifier can, the absorbent packs can too, but then they also will release posture if the air becomes very dry.
     
  10. mgkdrgn

    mgkdrgn Member

    Joined:
    Jul 21, 2008
    Messages:
    3,914
    Location:
    Lexington, SC
    Or, you can go to your local Harley Davidson dealer and get a few of the 2 - 3 lb "pigs" of desiccant that come packed in the motorcycle crates for free. They just toss 'em.
     
  11. JohnBT

    JohnBT Member

    Joined:
    Dec 26, 2002
    Messages:
    13,233
    Location:
    Richmond, Virginia
    A GoldenRod doesn't actually remove much moisture from the air. It keeps the safe's contents 2 degrees or so above room temperature and the moist air circulating through the door crack is first heated by the GR on the floor drying it a little, then it rises and exits around the door. The moisture won't condense on warm guns.

    I can imagine wood drying out if the safe is in a very hot location or in an air conditioned house with little humidity. I don't have those problems.

    I bought a digital humidity measuring thingy once. The percentage didn't come down much and I'm running 2 GRods in a large safe in a damp unfinished basement. I tossed the gauge 15 years ago; the guns are fine.

    John

    www.goldenroddehumidifiers.com/faqs.htm
     
  12. Pat M

    Pat M Member

    Joined:
    Feb 9, 2010
    Messages:
    249
    I use a golden rod, a desiccant container, and wipe the metal down with metalophilic oil about every six months. I also keep a dehumidifier running in the basement from about April through Sept.

    When I first got my safe, I opened it up after a week or so and there were beads of water on my guns.
     
  13. dw357

    dw357 Member

    Joined:
    Feb 27, 2012
    Messages:
    1
    Location:
    N.E. Ohio
    golden rod

    I use the golden rod also along with the dehumidifier in the summer. I have the safe in the basement and have the rod on a timer. I only run it about six hours in the evening and have done this for about 7 or 8 years with no problems. I really don't think they need to run 24/7 depending on your location of course.

    dw
     
  14. heeler

    heeler Member

    Joined:
    Dec 18, 2007
    Messages:
    2,619
    I live in the balmy gulf coast of Texas so I would say the humidity is pretty much similiar to Florida's.
    I use two Eva-Dry 500 dehumidifiers and recharge them by plugging them into a wall receptacle over night.
    I try to do this every two weeks as I am in and out of my safe daily.
    I wipe down all my firearms every six months with a lightly oiled rag and have never ever had an issue.
    Fwiw I pulled them out tonight to recharge them as I have gone a day past the three week mark and the humidity in my safe interior was registering at 62% and it is raining as I type this and has been quite humid outside for the last three days.
    Both Eva Dry's were ready to be recharged.
     
  15. Gtimothy

    Gtimothy Member

    Joined:
    Aug 21, 2010
    Messages:
    417
    Location:
    South West Florida
    I live in West Central Florida...It gets terrible hot in my garage! :fire: I have my safe in the house (slab floor) but still use dessicant packs inside just to be on the safe side.
     
  16. Blue Line

    Blue Line Member

    Joined:
    Mar 4, 2004
    Messages:
    547
    Location:
    Va
    shouldn't the wood be finished(sealed) on a gun? Wouldn't it absorb moisture in the field as well possibly changing the point of impact?
     
  17. BCRider

    BCRider Member

    Joined:
    Nov 15, 2008
    Messages:
    7,782
    Location:
    Pacific North"Wet" Coast of Canada
    As a long time hobby wood working nut I'd like to toss in a few things to keep in mind.

    First off wood is not a stable material. It reacts to the environment to absorb moisture in wet conditions and swell its dimensions across the grain. Put the wood into dry conditions and it'll give up some of the moisture and shrink across the grain. THis occurs constantly for the life of the wood.

    It is nearly impossible to seal out this moisture exchange as even the thickest and most plastic like finish is still somewhat pourous. At best we can slow the process down. But if the wood is kept in a very dry relative humidity environment for long enough it WILL shrink compared to the dimensions it had when first produced.

    As mentioned a garage can get VERY hot in the summer. When this happens even in the high humidity of someplace like Florida the relative humidity in that hot garage can fall to lower values. If we put a rifle stock that was made from wood that was formed at a higher long term relative humidity into such an "oven" then the wood will dry and shrink more and you can run into troubles with the wood deforming, shrinking and even splitting.

    The USUAL format for this is to see solid wood furniture that was made in a humid coastal climate be taken to a dry desert area where the wood shrinks and distorts as it dries to a very low moisture content. But it can just as easily happen to the wood used on guns kept in a safe which is in a garage if the temperatures are allowed to rise to a much higher than ambient level.

    So all in all if someone MUST put their safe in a garage it's only a good idea if the temperature and humidity can be controlled to some reasonable degree. We don't want it to become overly warm and very dry from a relative humidity stand point or the wood on rifles could shrink and distort and possibly even split. Yet we don't want it to be so humid that we get close to the dew point where moisture can condense on surfaces or even support the growth of moulds in the soft carpet liner found in a lot of safes. Just like Goldilocks found with the temperature of the Bear's porridges we need to get it JUST RIGHT.
     
Thread Status:
Not open for further replies.

Share This Page