Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Did i screw up? Winchester 94

Discussion in 'Rifle Country' started by Jackal, Sep 29, 2006.

Thread Status:
Not open for further replies.
  1. Jackal

    Jackal Member

    Joined:
    Mar 9, 2006
    Messages:
    4,373
    Location:
    Northwest Washington
    Hi everybody. I was in my local pawn shop today, when i saw on the rack, a nice pre-crossbolt saftey Winchester 94 30-30. Only problem was that the receiver's finish is all blotchy from probably sitting behind a truck seat, or some such thing. There is also little rusty spots all along the barrel(exterior only) and mag tube. I figure for the $225 that they were asking, i couldnt go wrong. Internals look very nice with only a couple small rust marks inside in the hammer area. Bore is mint and the action is very smooth. Did i screw up? Should i have passed on it, or is $225 a good deal? I'm am not sure that i want to keep it or not, since I am not sure that i'm up to the refinishing it needs.


    Yes, i do have the whole rifle, I took the pics after i stripped everything down.
     

    Attached Files:

  2. achildofthesky

    achildofthesky Member

    Joined:
    Mar 9, 2006
    Messages:
    383
    Location:
    AR, FL,???
    M94...

    Sounds good enough. Why refinish it? Use it as a shooter, just clean up the bore and action good and put it to work. Are you sure that the receiver blotches aren't color case hardening? I have a similar rifle with a trapper length barrel and it has nice color case hardening markings. I paid about the same for mine and it had a 4x Burris mini and mounts as well. Have fun, relax and enjoy.

    Patty
     
  3. rhubarb

    rhubarb Member

    Joined:
    May 28, 2005
    Messages:
    765
    Location:
    South Texas
    At the gun show I went to a month or so ago, Winchester 94s started at $400 for one a little better than yours and went up from there.
     
  4. redneck2

    redneck2 Member

    Joined:
    Dec 25, 2002
    Messages:
    10,137
    Location:
    Northern Indiana
    Dude...it's a shooter. Shoot it.

    I'd take the money you were going to spend to fix it up and buy ammo.
     
  5. SigfanUSAF

    SigfanUSAF Member

    Joined:
    Aug 26, 2006
    Messages:
    982
    Location:
    North Carolina
    Looks like an abused blued reciever to me. $225 for that most likely would have opened my wallet. Make sure to keep the reciever lightly covered in oil when not in use to prevent its condition from worsening.
     
  6. The Deer Hunter

    The Deer Hunter Member

    Joined:
    Aug 20, 2006
    Messages:
    2,801
    Location:
    Chairborne HQ, MA :(
    i would say fix it up.

    Seeing as how those sell outs :cuss: sold out it would be hard to find a nice gun like that. If you do decide to fix it up and have it re-blued, bring it to a profesional. I blued the barell to my muzzleloader that i built and it didnt come out good at all. (Fortunatetely it gives it a really rustic lock-stock-and barrel look.)
     
  7. Jackal

    Jackal Member

    Joined:
    Mar 9, 2006
    Messages:
    4,373
    Location:
    Northwest Washington
    For a refinish, i was thinkin of Brownells AlumaHyde. Either matte black or dark parkerized gray.
     
  8. SigfanUSAF

    SigfanUSAF Member

    Joined:
    Aug 26, 2006
    Messages:
    982
    Location:
    North Carolina
    AlumaHyde I and II don't stand up to use and abuse too well. I have had great sucess with their aerosol baking laquer (just took my AR upper and lower out of the oven a few minutes ago, don't tell the wife;) ) and their oven cure gun coat. I did my AR recievers in dark parkerized grey, and they look great. it even has the rough finish of parkerizing. The cure time is 1 hour, assemble when cool. Better than waiting days for the aluma-hyde to dry! I save the alumahyde for refinishing plastic and composite stocks.
     
  9. mustanger98

    mustanger98 Member

    Joined:
    Jun 23, 2004
    Messages:
    2,986
    Location:
    Union County, GA, CSA
    I've re-blued a couple of Mausers and a couple of sporter/working guns... I just use BirchwoodCasey's after giving the gun a good wire brushing. Pitting may or may not be character, but it won't get worse when you clean it up and re-blue and keep it oiled. That's what I'd do.

    Like others have said, it's a shooter. And for $225, any more, I'd have had to jump on it too.
     
  10. SigfanUSAF

    SigfanUSAF Member

    Joined:
    Aug 26, 2006
    Messages:
    982
    Location:
    North Carolina
    [​IMG]

    [​IMG]

    Heres a couple of pics of the dark park. grey.
     

    Attached Files:

  11. mustanger98

    mustanger98 Member

    Joined:
    Jun 23, 2004
    Messages:
    2,986
    Location:
    Union County, GA, CSA
    That aerosol baking laquer... I wonder how it'd do on a Garand. Maybe if I get another one or two with a lot of finish wear before CMP runs out...
     
  12. rangerruck

    rangerruck Member

    Joined:
    Jan 12, 2006
    Messages:
    8,374
    Location:
    Texas, baby!
    even if you bloew another 10k rounds through it, it will still start at 350 or more the next time you try to sell it.
     
  13. Jackal

    Jackal Member

    Joined:
    Mar 9, 2006
    Messages:
    4,373
    Location:
    Northwest Washington
    This may sound kinda funny, but, about 1 hour ago i found out that I overdrew my checking by... guess how much...$212.00. If anyone wants it, i will sell to the first pm for $220.00 + shipping. I cant return it to the shop, and i dont have the cash to repay my checking. Life sucks when this crap happens.

    Edit: has synthetic stock, and for extra $40, i can include a new unfinished walnut stock.
     
  14. wuchak

    wuchak Member

    Joined:
    Feb 18, 2005
    Messages:
    596
    Location:
    Shawnee, KS
    Based on this last post I'd say the answer to your original question is yes.:banghead:
     
Thread Status:
Not open for further replies.

Share This Page