1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dillon 650 strong mount measurements.

Discussion in 'Handloading and Reloading' started by deviantsaint, Mar 8, 2010.

Thread Status:
Not open for further replies.
  1. deviantsaint

    deviantsaint Member

    Feb 25, 2009
    Austin, tx
    I've got a Dillon xl650 that I'm going to try and mount to a pedestal stand.

    This one to be precise:


    The press will mount as is once I drill some holes, but I wanted to get the foot print measurements for the Dillon 650 strong mount to see if it would fit on the pedestal top before I go blow money on it.

    Anyone got one to measure for me?
  2. EddieNFL

    EddieNFL member

    Nov 9, 2009
    Here's the dimensions for mine, as mounted.

    11-7/8" wide X 10" deep. Bolt holes are 10-1/2" side to side and 9" front to back.

    DISCLAIMER: Mine has been mounted for many years, so it's possible the bench holes were slightly off from the mount holes and I "squeezed" or "stretched" the mount. Also, I used a tape measure and eyeballed it. Either way, it hasn't fallen off the bench, yet.

    If you call Dillon, I'll bet they will give you the exact specs. 800-223-4570

    Good luck.
  3. JimKirk

    JimKirk Member

    Nov 23, 2008
    Nicholls,GA South Georgia
    Add your own top plate, using studs or welded in headless bolts or just weld a top to it. Make it what ever size you want.

    Jimmy K
Thread Status:
Not open for further replies.

Share This Page